Broken vanes on Mazzer Super Jolly doser

Equipment doesn't work? Troubleshooting? If you're handy, members can help.
travis85904
Posts: 25
Joined: 8 years ago

#1: Post by travis85904 »

I broke off two of the vanes on my doser today because I was trying to remove it and forgot to knock out the pin that holds the bolt in place. I looked on espresso parts but couldn't find a replacement set of vanes for it so I'm wondering if anybody knows where I can order the little wheel with the vanes


User avatar
johnny4lsu
Posts: 775
Joined: 12 years ago

#2: Post by johnny4lsu »

http://clean-machine.com.au/Mazzer_Supe ... l?id=45573


Not sure this will help, but it appears to have the part numbers.

User avatar
HB
Admin
Posts: 21981
Joined: 19 years ago

#3: Post by HB »

travis85904 wrote:I looked on espresso parts but couldn't find a replacement set of vanes...
I think this is it: https://www.espressoparts.com/lower-sta ... sing-units
Dan Kehn

Bob_M
Posts: 578
Joined: 16 years ago

#4: Post by Bob_M »

I have an intact one here in my junk box. I think it belonged to an old mini. It is close to 108 mm in diameter.