Bakelite handle preservation - Page 2
-
- Posts: 3837
- Joined: 10 years ago
what has the world come to when beeswax is a hard to find item, you might be able to find it in the arts and craftsshops or with a local beekeeper (my source is a neighbour keeping bees)yakster wrote:I had trouble finding beeswax until I found that small pucks of the stuff are sold in sewing stores for coating thread to keep it from fraying.
LMWDP #483
- yakster
- Supporter ♡
- Posts: 7341
- Joined: 15 years ago
I was tracking down local beekeepers, but I struck out on that one in my area, that's why I shared this tip.
-Chris
LMWDP # 272
LMWDP # 272
- TomC
- Team HB
- Posts: 10552
- Joined: 13 years ago
Get it delivered to your door for $5.50
Join us and support Artisan Roasting Software=https://artisan-scope.org/donate/
- cannonfodder
- Team HB
- Posts: 10507
- Joined: 19 years ago
I have restored a few sets before. I put them on the lathe and wet sand them to clean and polish then I take them to the buffing wheel to polish with a white rogue then finish with chromium oxide. Once cleaned and polished put a couple coats of Renaissance wax on them. Renaissance wax is a crystalline wax. Hardens like a rock and does not melt like a car/bees/carnauba wax will. The heat from the group head will melt soft wax.
Dave Stephens
-
- Posts: 554
- Joined: 17 years ago
Thanks for your input here everyone!
On reading the blurb on Renaissance Wax, it really seems to be worth trying. Thanks for the tip, Cannonfodder..
Paolo
On reading the blurb on Renaissance Wax, it really seems to be worth trying. Thanks for the tip, Cannonfodder..
Paolo
- cannonfodder
- Team HB
- Posts: 10507
- Joined: 19 years ago
Dave Stephens