Equipment doesn't work? Troubleshooting? If you're handy, members can help.
johnlichiwai
Posts: 3 Joined: 8 years ago
#1 :
Post
by johnlichiwai » February 11th, 2016, 5:45 am
Hi all,
I just got the Quick Mill Achille PID model. It makes great espresso with the tank mode.
However, dripping continuously from a tube inside.
Attached is the picture about the tube drips when the machine is on.
Anyone one could give me advice?
Thanks,
John
sorrentinacoffee
Posts: 747 Joined: 16 years ago
#2 :
Post
by sorrentinacoffee » February 12th, 2016, 3:29 am
I can't tell from your picture- but is that possibly the pressure relief valve and/or the vacuum breaker valve? It could be a combined one. If you can I would just check it to see that any tubes are correctly attached- and that it is properly tightened/sealed. Could just be that you need to tighten it up a fraction.
Sponsored by iDrinkCoffee - everything you need to brew superb coffee anywhere
johnlichiwai (original poster)
Posts: 3 Joined: 8 years ago
#3 :
Post
by johnlichiwai (original poster) » February 12th, 2016, 11:06 pm
Thanks for your help and recommendation.
The pressure is always at 1 bar. Temperature is at 121.
Indeed the condensation is dripping out from this water tap outlet. It just like a tap.
I zoomed in the previous one and attached the other one. Please help.
johnlichiwai (original poster)
Posts: 3 Joined: 8 years ago
#4 :
Post
by johnlichiwai (original poster) » February 26th, 2016, 2:33 am
Hello all,
I found out that the source of continuous dripping and it is fixed.
BR,
John