Custom Wood for your Espresso Machine - Page 71

July 24th, 2014, 12:13 pm

Another couple knifes ready to ship off. An ironwood burl damasks chefs knife with mosaic pins and a couple Macassar ebony hunting knifes.

July 25th, 2014, 10:39 pm

I would like to know how I can get some Iron wood handles for my machine.

July 26th, 2014, 12:35 am

email me. My address is in the first post of the thread.

July 28th, 2014, 10:35 am

Another set off the bench. Portafilter handles, steam/water/brew control set for a Rocket espresso machine. Wood is East Indian Rosewood in a natural oil finish.

July 28th, 2014, 10:49 am

A few weeks ago I made a full set for a La Marzocco GS3 including side panels. The owner sent me a few photos of the final product. Keep in mind this wood is very difficult to photograph. The dark colors and high gloss finish make photography quite difficult. Almost wish I had a GS3 to make a set for myself.

July 28th, 2014, 10:51 am

Made him a tamper stand to go with it, got to get it in the mail.

July 31st, 2014, 8:35 am

This is either a Duett Reg Barber tamper or a barbell for a raccoon, and a Mazzer adjustment stud.

August 1st, 2014, 4:52 pm

Bloodwood in a satin finish. This stock has a nice iridescent orange/yellow shimmer in it when the light hits it just right.

August 5th, 2014, 8:30 pm

Little Cocobolo in a satin finish for an Isomac. The wood is still turning, the reds will deepen over more time. Cocobolo is actually purple when you turn it. As it oxidizes it turns that brick red everyone likes.

August 10th, 2014, 10:42 am

Now this is some nice wood. I have only seen curly Cocobolo once before. This block of stock just happens to be curly under the surface. Lever/portafilter/steam control for MicroCasa a Leva and handles for a HG One grinder. That is going to be one wicked looking pair.