Below is a collection of this forum's most popular topics. To nominate a thread for inclusion in this list, please post a reply to this message. Remember to check the Resources page for other references.
hello from Athens Greece I bought an expobar brewtus 4 machine and I pid p=3.0 , i=0,05 ,d=2,0 and f04=10 and i have the temp first fall at 89 and at the end of the shot going up to 96.the settings are from a friend.the second problem i saw today is when I'm doing the shot the...
I'm looking to get a set of seals for the old brass sleeve LP (with the non-removable shower screen). I have a leak coming out the sides of the group and I suspect it's the upper gasket/seal where the inner brass sleeve mates with the group. I checked all the normal sources (OE...
First of all, I hope this doesn't insult any owners of the high end lever machines, but I'm having trouble understanding what exactly makes some manual levers better than others. I think the most simple way to frase my question is:
Could any manual lever make the same...
Bosco water chamber, how does it look and work inside ??
I found several photos of it
but none with a direct look into it
The dipper tube is rather BIG, it could hold a second dipper coming from the back of the grouphead like on a normal CMA
But i read here on HB that the...
I recently purchased a new Elektra Microcasa a Leva after having used two pavonis for a few years. I LOVE this new machine because of the build quality, powerful steam and very tasty shots. From audience feedback the lattes are...
I was so happy yesterday when Mr. Giacomo Bialetti, one of the owner of OMG sent me some old pics and papers.
One photo was labelled Fiera di New York maggio 1959 .
Have a look on my blog and double click on the pic to enlarge it! 8)
does anybody know whether Caravel 1.0 PF will work with 2.0 machine? I've got 2.0 machine and I'm thinking about buying bottomless portafilter from . The problem is that it's listed under 1.0-1.3 accessories. I've contacted the store but got no answer.
So I recently ventured into the lever world with my first manual lever of a 1st gen La Pavoni ECP version 1.6 with the massimo Minimo switch. I have had some wonderful shots off the machine and have been really enjoying the fun one can have with all that control....