"NEW" lever in the house - Carimali Jollyna 73 - Page 2
- zeb
- Posts: 311
- Joined: 13 years ago
Haha Gábor we're brother in Carimali
I can't have a look on it now but if I remember well the shower screen is maintained by the group gasket. I will know more when you will finish your resto job as there, it could be too long
I can't have a look on it now but if I remember well the shower screen is maintained by the group gasket. I will know more when you will finish your resto job as there, it could be too long
- doubleOsoul
- Posts: 1627
- Joined: 16 years ago
there's just something about that big substantial grouphead. Reminds me of the Conti. Good looking out Gabor!
www.soulsidecoffee.com LMWDP #354
- naked-portafilter (original poster)
- Posts: 698
- Joined: 10 years ago
Thanks Cher, I hope I will find the time to test the "big" lever soon .
- truemagellen
- Posts: 1219
- Joined: 14 years ago
I am looking for another portafilter for my machine.
I have a carimali elle any chance to get a crude drawing of the dimensions of it? perhaps even lay it on a scanner and upload it?
I have a carimali elle any chance to get a crude drawing of the dimensions of it? perhaps even lay it on a scanner and upload it?
- naked-portafilter (original poster)
- Posts: 698
- Joined: 10 years ago
Hi Jason,
I'll make some pictures and will mark the dimensions for you.
Cheers
Gabor
I'll make some pictures and will mark the dimensions for you.
Cheers
Gabor
- naked-portafilter (original poster)
- Posts: 698
- Joined: 10 years ago
Hi Jason,
Give me a note if you need more:
https://plus.google.com/photos/11405871 ... 4400854065
Gábor
Give me a note if you need more:
https://plus.google.com/photos/11405871 ... 4400854065
Gábor
- truemagellen
- Posts: 1219
- Joined: 14 years ago
This is so great. I am sorry for my lack of response I was in Vietnam unexpectly for a month soon after my post.naked-portfilter wrote:Hi Jason,
Give me a note if you need more:
https://plus.google.com/photos/11405871 ... 4400854065
Gábor
I am going to see what can be done with this, it makes me think my gasket is all wrong since my portafilter looks almost the same.
- naked-portafilter (original poster)
- Posts: 698
- Joined: 10 years ago
I'm happy you've found my answer . Welcome back!
Gábor
Gábor
- truemagellen
- Posts: 1219
- Joined: 14 years ago
I've explored your portafilter site (mitutoyo caliper intreeged me) great work.
I own a precision machine shop in the USA, mostly aerospace and medical device I fix my machines at the shop but don't have time yet to do customer work.
One day you may see something from us in the grinder realm likely.
. Thanks again
I own a precision machine shop in the USA, mostly aerospace and medical device I fix my machines at the shop but don't have time yet to do customer work.
One day you may see something from us in the grinder realm likely.
. Thanks again
- naked-portafilter (original poster)
- Posts: 698
- Joined: 10 years ago
My roastery is next to a precision machine shop (in Hungary ). Not by accident.
New grinder??? Can't wait!!! Have you already arranged the assembly in Vietnam ))?
New grinder??? Can't wait!!! Have you already arranged the assembly in Vietnam ))?