Bezzera Strega 2015 workmanship & newbie impressions
-
- Posts: 60
- Joined: 9 years ago
Hello everybody.
I just received the first of two packages which contains accessories to Bezzera Strega.
Just wonder if that's appropriate quality for Bezzera or I should contact the seller.
Rest photos here https://www.dropbox.com/sh/u5geu5pno8zf ... qUb8a?dl=0
Although it's coming long way from Italy to Germany, and then to Russia, everything was solid packed.
I just received the first of two packages which contains accessories to Bezzera Strega.
Just wonder if that's appropriate quality for Bezzera or I should contact the seller.
Rest photos here https://www.dropbox.com/sh/u5geu5pno8zf ... qUb8a?dl=0
Although it's coming long way from Italy to Germany, and then to Russia, everything was solid packed.
- baldheadracing
- Team HB
- Posts: 6226
- Joined: 9 years ago
The inside welds aren't finished on my 2014 production model either.
-"Good quality brings happiness as you use it" - Nobuho Miya, Kamasada
-
- Posts: 60
- Joined: 9 years ago
-
- Posts: 1316
- Joined: 9 years ago
I don't own one, or anything like it, but while personally I can see accepting the inner weld if the price was right and you don't normally see it, if those green lines are visible that would obviously need correction.
Yes, i you per this on an iPhone
-
- Posts: 131
- Joined: 10 years ago
That looks like the protective film, it should just peel off.
-
- Posts: 659
- Joined: 16 years ago
Laser cut stainless steel from Italy generally comes covered in white plastic film to stop scratches before the customer gets it. It peels right off. The unpolished welds are typical, if it can't be seen from the outside they don't care about it.
Alan
Alan
- sorrentinacoffee
- Posts: 747
- Joined: 16 years ago
Ha!Alan Frew wrote:if it can't be seen from the outside they don't care about it.
Alan
-
- Posts: 554
- Joined: 10 years ago
I heard it was only skin deep but I don't believe it.
-
- Posts: 260
- Joined: 12 years ago
Guys, wouldn't that weld pose a risk of rusting?
(The photo appears to be the drip tray?)
(The photo appears to be the drip tray?)