Grease for exposed brass - Page 2

Want to talk espresso but not sure which forum? If so, this is the right one.
RyanP
Posts: 871
Joined: 8 years ago

#11: Post by RyanP »

This is from the CT1 Ownder Experience thread.

swazi wrote:BTW, since i already had super-lube for my HG-One, i sent them a query as to whether its acid free and usable on CT-1 copper, here is the response i got from them.

From: Debby Alagna <debby@super-lube.com>
Date: May 27, 2016 at 7:13:30 AM PDT
Cc: Bill Reilly <Bill@super-lube.com>, Kevin Wall <kevin@super-lube.com>
Subject: RE: Grease question



Thank you for your inquiry and interest in Super Lube®. The Multi-Purpose Grease is acid free and will work well to control oxidation on copper. Please click on the link below for the Technical Bulletin:
http://www.super-lube.com/files/pdfs/Te ... Grease.pdf

Regards,
Debby Alagna
International Sales Administrator
Synco Chemical Corporation
Phone: 631-567-5300 Ext. 114
Fax: 631-567-5359
Email: debby@super-lube.com
Website: http://www.super-lube.com


Technical recommendations are based on tests and information believed to be reliable. However, we do not guarantee the results obtained from these recommendations, and the recommendations are made on condition that we will not be liable for any damages resulting from their use. Variations to these recommendations may be necessary to suit individual requirements. No representative of ours has authority to waive or change this provision.

Post Reply