www.caffedbolla.com: speciality teas and coffee; siphon brewing

Skip to content

I-Roast 2: Converting to Stick Shift, Possible? - Page 2

Discuss roast levels and profiles for espresso, equipment for roasting coffee.

Link to "I-Roast 2: Converting to Stick Shift, Possible?"by coffee.me on Thu Jun 18, 2009 4:46 am

To answer this, I ran it empty, with clean top filters, at max fan, max heat, ~80F ambient. MET TC, which is placed 1mm before the hot air would hit a bean, started reading 440F+ after 1:30+. From that point onwards, the temp was increasing slowly; I'd guess it'd hit 500F at about 3:00. Needless to say, if it was loaded with beans, air would be restricted and MET would get hotter, faster.
User avatar
coffee.me
 
Posts: 326
Joined: Mar 18, 2008
Location: EU
Top

Link to "I-Roast 2: Converting to Stick Shift, Possible?"by Espin on Fri Jun 19, 2009 7:11 pm

Very helpful, thanks.

(Should also get hotter with slower fan speed.)
Espin
 
Posts: 88
Joined: Mar 21, 2009
Location: Madison, Wisconsin
Top
Previous

Return to Home Roasting

ContactContact Us

Legal disclaimer and copyright: This content and all its parts are copyrighted, all rights reserved. Content including all text and images in part or in whole may not be reproduced in any electronic or printed medium without prior permission. Home-Barista, Home-Barista.com and related logos are trademarks of Home-Barista.com, LLC. Other trademarks are the property of their respective owners. By accessing this site, you agree to the terms of service.

Overall speed: fast, current page: 0.3s, avg: 0.6s, max: 2.8s