www.ptscoffee.com: without the love, it's just coffee

Skip to content

Exact Super Jolly Throat Size - Page 2

Postby cbrucecampbell on Tue Aug 11, 2009 4:26 pm

Yep. Sorry. I have a '98 SJ in the office as well as the one at home. There is a little 1mm or so offset/step milled into both of them a few mm from the top. I measured below that - where I would expect the tamper to sit. It's probably 1-2mm wider above that step.
Bruce Campbell
User avatar
cbrucecampbell
 
Posts: 93
Joined: Jun 02, 2008
Location: Eugene, Oregon
Top

Postby mini on Tue Aug 11, 2009 5:22 pm

Well that pretty much explains it.

My last question is how far your tamper (at just under 58mm) fits down the throat, cbrucecampbell. Pretty much all the way until it drastically narrows, right before the burrs?
matt
mini
 
Posts: 230
Joined: Jul 18, 2009
Location: Atlanta, GA
Top
www.espressoparts.com: espresso machines, grinders, brewing equipment & parts
www.espressoparts.com: espresso machines, grinders, brewing equipment & parts

Postby cbrucecampbell on Tue Aug 11, 2009 6:33 pm

Nope, it doesn't go that far. It sits about 1/2 inch above that.
Bruce Campbell
User avatar
cbrucecampbell
 
Posts: 93
Joined: Jun 02, 2008
Location: Eugene, Oregon
Top
Previous

Return to Grinders

ContactContact Us

Legal disclaimer and copyright: This content and all its parts are copyrighted, all rights reserved. Content including all text and images in part or in whole may not be reproduced in any electronic or printed medium without prior permission. Home-Barista, Home-Barista.com and related logos are trademarks of Home-Barista.com, LLC. Other trademarks are the property of their respective owners. By accessing this site, you agree to the terms of service.

Overall speed: , current page: s, avg: s, max: s