Identifying year of La Pavoni Europiccola Millenium

A haven dedicated to manual espresso machine aficionados.
Lockman
Posts: 314
Joined: 15 years ago

#1: Post by Lockman »

How does one tell if you have the post 1999 or the pre Europiccola? :?



...split from Best tamper size for La Pavoni Europiccola Millenium - 51.0mm or 51.5mm ? by moderator...
LMWDP #226.

"It takes many victims to make a culinary masterpiece"

User avatar
Fullsack
Posts: 856
Joined: 18 years ago

#2: Post by Fullsack »

Lockman wrote:How does one tell if you have the post 1999 or the pre Europiccola? :?
The removable steam wand on the Millennium is a sure fire way to tell. The steam wand on the pre is fixed.
LMWDP #017
Kill all my demons and my angels might die too. T. Williams

Lockman (original poster)
Posts: 314
Joined: 15 years ago

#3: Post by Lockman (original poster) replying to Fullsack »

Thanks Thanks! I will be looking for the elusive 51mm. :|
LMWDP #226.

"It takes many victims to make a culinary masterpiece"

hudsterboy
Supporter ❤
Posts: 127
Joined: 15 years ago

#4: Post by hudsterboy »

Fullsack wrote:The removable steam wand on the Millennium is a sure fire way to tell. The steam wand on the pre is fixed.
Argh. I thought the red/white switch was the tell for a pre-millenium. My 49mm tamper arrived last night, and it seems too small. My steam wand is removable.

Anyone need a 49mm tamper?

Lockman (original poster)
Posts: 314
Joined: 15 years ago

#5: Post by Lockman (original poster) »

Which one did you buy?
LMWDP #226.

"It takes many victims to make a culinary masterpiece"

Lockman (original poster)
Posts: 314
Joined: 15 years ago

#6: Post by Lockman (original poster) »

Fullsack wrote:The removable steam wand on the Millennium is a sure fire way to tell. The steam wand on the pre is fixed.
Wait a minute, I can take the wand off both of mine. One has the 49 mm and the other the 51 mm.

Am I missing something here? :?
LMWDP #226.

"It takes many victims to make a culinary masterpiece"

User avatar
Fullsack
Posts: 856
Joined: 18 years ago

#7: Post by Fullsack replying to Lockman »

I've got both machines, the 49mm pre wand is fixed, the 51mm Millennium is removable. H-B and eBay pictures of these machines have been consistent with this assertion. By removable I mean no wrench is necessary to remove the Millennium wand, a wrench is necessary to remove the pre wand, maybe I should have been more specific. If you have a 49mm pre with a wand removable by hand, then it is something new to many of us.
LMWDP #017
Kill all my demons and my angels might die too. T. Williams

User avatar
Fullsack
Posts: 856
Joined: 18 years ago

#8: Post by Fullsack »

Can you show us a picture?
LMWDP #017
Kill all my demons and my angels might die too. T. Williams

Lockman (original poster)
Posts: 314
Joined: 15 years ago

#9: Post by Lockman (original poster) »

Okie dokie,



I noticed the angle of the arms is different when on the machines. You can see the baskets are a different size as well. The other way around it fits right inside of the other.
LMWDP #226.

"It takes many victims to make a culinary masterpiece"

User avatar
TUS172
Posts: 694
Joined: 17 years ago

#10: Post by TUS172 »

Lockman wrote:How does one tell if you have the post 1999 or the pre Europiccola? :?
Are you asking on the two units pictured above? Which is a 49mm and which is a 51mm?

The one on the left has the double switch and also the shoulder slope of the bell on the grouphead is longer and not as sharp as the one on the right. That tells me that it is a pre-millennium Pavoni and should be 49mm portafilter.

The one on the right has the single switch and the shorter bell housing on the grouphead which is indicative of the post 2000 Pavonis and should be the 51mm.

I have bought new portafilters for older pavonis that I needed to grind down the ears on so that they would fit the grouphead properly. But I have never bought a portafilter that was designed for a Pavoni that was really sloppy. That being said; are you fitting the portafilter w/o a filter basket? Then of course the fit will seem really loose. Also a 49mm filter basket will not fit over the screen area of a 51mm pavoni grouphead. A 51mm basket will barely fit past the bottom of a 49mm grouphead if at all. You have baskets and a portafilter it shouldn't be that much of a challenge to figure out... Especially if you have a tape measure. Am I missing something here?

Additionally no 2 baskets are exactly alike at all... If you were to have Reg turn you a tamper at say 49.4mm then chances are the tamper is going to get bound up in the basket fairly near the top. But as a comparison a 49.0 will go all the way to the bottom of every basket. So the larger you go in diameter the more likely you are to get tampers that may get bound higher in each basket. I have a 49.4 for my Creminas and I use Microcasa 'A' Leva baskets exclusively. In most of the baskets the 49.4 hangs up about 2/3 of the way down in the basket but is a near perfect fit for my dosing. However in 2 of them it hangs up halfway down. In the Pavoni baskets that I have on hand for my Pavonis it binds up 2/3 of the way up on one and half way down on the other. So as I say it is your call but if you are going to own say 3 - 4 baskets then you might well want to stick with a 49.1mm. So if you are sizing for a 51mm pavoni basket and you want to be safe... I would suggest a 51.1... JMHO
Bob C.
(No longer a lever purist!)
LMWDP #012

Post Reply