SanRemo grinder
-
- Posts: 4
- Joined: 16 years ago
Where I can find the owner's manual and specification for SanRemo grinder (Macinadosatore mod. SR)?
-
- Posts: 141
- Joined: 19 years ago
http://www.sanremomachines.com/index_e.html
Best I can do so far. Like all San Remo machines, it isn't typical.
You shouldn't need a manual for a grinder. Insert beans, grind, adjust till the coffee doesn't stink and set the dose. You can measure the mills and find replacements.
The company doesn't have enough traction in the market to warrant extensive after-market support just yet, but that only means they are buying most of their components from outside vendors.
Best I can do so far. Like all San Remo machines, it isn't typical.
You shouldn't need a manual for a grinder. Insert beans, grind, adjust till the coffee doesn't stink and set the dose. You can measure the mills and find replacements.
The company doesn't have enough traction in the market to warrant extensive after-market support just yet, but that only means they are buying most of their components from outside vendors.
Michael Teahan
analogue | coffee
analogue | coffee
-
- Posts: 4
- Joined: 16 years ago
-
- Posts: 141
- Joined: 19 years ago
Try again. The Doge is the new Fiorenzato and shares little with the old. There are two Fiorenzato companies as a result of some disagreement over the sale of the company several years ago. Some kind of strange tale, I think, no one knows for sure.
There is very little of these grinders in the US, while the T-80 is everywhere.
There is very little of these grinders in the US, while the T-80 is everywhere.
Michael Teahan
analogue | coffee
analogue | coffee
-
- Posts: 4
- Joined: 16 years ago
Closing sector (doser sheet) at Fiorenzato T80 (T48) another than at SanRemo.
- HB
- Admin
- Posts: 21981
- Joined: 19 years ago
Thanks for the correction Michael. For those following this thread, note other responses to Sntar's cross-post to CoffeeGeek.
Dan Kehn
-
- Posts: 4
- Joined: 16 years ago
I have got the parts to my grinder SanRemo SR. Now the grinder works. If you interesting I can show the photo as it was made.
- HB
- Admin
- Posts: 21981
- Joined: 19 years ago
Thanks for the follow up. If you want to share the background of your repair, I'm interested.
Dan Kehn