Missing Mazzer burr springs
-
- Posts: 2
- Joined: 13 years ago
Hi-
Just picked up a Mazzer Mini in very good condition but the springs (3) that support the upper burr are missing.
Anyone know a good source or can someone post the dimensions and image of these springs?
Thanks, Erich
Just picked up a Mazzer Mini in very good condition but the springs (3) that support the upper burr are missing.
Anyone know a good source or can someone post the dimensions and image of these springs?
Thanks, Erich
- HB
- Admin
- Posts: 22021
- Joined: 19 years ago
Espresso Parts has them here; I found it by searching their site using this exploded diagram. The part is labeled MAZ50 in the diagram. Below are photos of the springs in question:
From Mazzer Mini Component Photos
They're probably missing because someone turned over the grinder to dump out the grounds and forgot the springs will fall out into the trash (don't ask how I know).
From Mazzer Mini Component Photos
They're probably missing because someone turned over the grinder to dump out the grounds and forgot the springs will fall out into the trash (don't ask how I know).
Dan Kehn
- allon
- Posts: 1639
- Joined: 13 years ago
Shop vac.HB wrote:They're probably missing because someone turned over the grinder to dump out the grounds and forgot the springs will fall out into the trash (don't ask how I know).
LMWDP #331