Mazzer Super Jolly burr replacement
-
- Posts: 1
- Joined: 13 years ago
Hello ...this question has probably been asked and answered many times before, but does anyone have instructions on how to replace the grinding burrs on an '06 Super Jolly ?? ....thanks...Chet
Hello again......many thanks to all who sent answers...they all were very useful and I am happy to report the new burrs are installed and working great...they probably didn't need to be replaced, but when purchasing a used grinder, caveat emptor ! ....it gave me a chance to examine the "innards" closely...it was pretty clean and was advertised as "pristine" ...I've ordered a smaller hopper and probably should get a drip tray as it was missing from this unit...MANY THANKS to all...................
Hello again......many thanks to all who sent answers...they all were very useful and I am happy to report the new burrs are installed and working great...they probably didn't need to be replaced, but when purchasing a used grinder, caveat emptor ! ....it gave me a chance to examine the "innards" closely...it was pretty clean and was advertised as "pristine" ...I've ordered a smaller hopper and probably should get a drip tray as it was missing from this unit...MANY THANKS to all...................
-
- Posts: 441
- Joined: 15 years ago
- HB
- Admin
- Posts: 21983
- Joined: 19 years ago
Surprisingly nobody has posted a step-by-step tutorial. Here are some related threads that you may find helpful:
Removing Super Jolly lower burr carrier
Mazzer reassembly problem after burr replacement
Cleaning a Mazzer Mini
How to find the grinder true zero point
Fine tuning grinder setting with minimum waste
Removing Super Jolly lower burr carrier
Mazzer reassembly problem after burr replacement
Cleaning a Mazzer Mini
How to find the grinder true zero point
Fine tuning grinder setting with minimum waste
Dan Kehn
- Koffee Kosmo
- Posts: 136
- Joined: 14 years ago
The job of changing burrs on a Mazzer is a very simple processChet wrote:Hello ...this question has probably been asked and answered many times before, but does anyone have instructions on how to replace the grinding burrs on an '06 Super Jolly ?? ....thanks...Chet
If you can use a screwdriver you can change the burrs
3 screws hold each of the burrs and it does not need any further comment
godlyone wrote:Follow the first few steps here:
http://www.fotchbook.com/faq/mazzer/index.html
This is an excellent pictorial
KK
- benm5678
- Posts: 222
- Joined: 16 years ago
I was surprised to find when reinstalled mine that there's some play (1-2mm) in the burrs before completely tightening screws... so it seems you have to use your best judgement to make sure it's centered before locking down. Strange...