Below is a collection of this forum's most popular topics. To nominate a thread for inclusion in this list, please post a reply to this message. Remember to check the Resources page for other references.
Hello everyone, first time posting here, looking for a bit of help.
I was given a new Mr Coffee Café Barista from a family member that had it sitting in its box and never used it.
I am trying to figure out a way to get rid of the mix frother reservoir and attach a steam arm to...
I finally got around to plumbing my Expobar Office Lever Plus. The plumbing is going fine but I think I am missing a step, I still have the two hoses going into the plastic reservoir and it looks like one (or both) is putting out excess water. It's hot water so I'm...
Hi, I have recently bought a Linea mini sample machine (w/ discount :P ). I was told the machine has never been used to make any coffee, but it has ran water through for a few times (long ago), and then it has been left for display in a showroom for over half year.
I wanted to share my experience and see what others are seeing/thinking about the latest GS3.
I know no machine is perfect, but I wonder if the current GS3 MP design is somewhat flawed.
As most of you may know, the new MP has a conical valve, such that when the paddle is...
Just curious if we can expect to see all of the usual e61 based machine manufacturers like Profitec, Izzo etc... rolling out their own paddle updates or is this locked to Lelit via a patent?
Hello,
While cleaning my reservoir tank today, I've pulled out my the rubber hose of my linea mini and found lots of disgusting algae. Was thinking if anyone have the same issue and if we can get a replacement hose somewhere?
My machine's pump stopped working the other day. The seal on the pump had failed, causing water intrusion into the cavity between the pump and the motor. This caused the bearing on the motor to eventually fail. This is something that apparently has been an issue with these...
I bought a used 2-year old GS3-AV, and while it's been making great espresso -- I'm perplexed by the readings on the boiler pressure gauge. I'm hoping the group can help me wrap my head around it.
I've read all of the back-posts about adjusting the boiler pressure expansion...
I just bought an ECM Classika PID from someone on craigslist, brought it home, and had a few great days of pulling shots. I bought his grinder as well, and was able to start pulling shots in the 30 to 35 second range (with dwell), after only making a few small adjustments. He...