Substitute mypressi basket??

Need help with equipment usage or want to share your latest discovery?
User avatar
JavaJive
Posts: 31
Joined: 12 years ago

#1: Post by JavaJive »

Hi..

Anyone happen to know of a filter basket that will work in the mypressi twist?
Since they've gone under, parts are hard to get.
Are there baskets from some other brand/source that would fit and work?
A cheap as dirt tamper would be nice too...

Thanks in advance!

Greg

User avatar
yakster
Supporter ♡
Posts: 7337
Joined: 15 years ago

#2: Post by yakster »

I picked up a couple of 53 mm filter baskets from eBay, IIRC, and a 53 mm tamper and they fit no problem. I think they were Saeco double filter baskets.
-Chris

LMWDP # 272

User avatar
spressomon
Posts: 1908
Joined: 12 years ago

#3: Post by spressomon »

FYI: Rossa Portaspresso use 53mm baskets...I used the mypressi baskets in the PG.
No Espresso = Depresso

User avatar
JavaJive (original poster)
Posts: 31
Joined: 12 years ago

#4: Post by JavaJive (original poster) »

Very helpful!
Thanks so much!!!

bakafish
Posts: 629
Joined: 11 years ago

#5: Post by bakafish »

spressomon wrote:FYI: Rossa Portaspresso use 53mm baskets...I used the mypressi baskets in the PG.
My Rossa PG basket is 55mm.

User avatar
spressomon
Posts: 1908
Joined: 12 years ago

#6: Post by spressomon replying to bakafish »

Its been a couple years since I had my mypressi in hand...I can not verify/remember 100% if the Rossa baskets fit into the mypressi; me thinks I used the Rossa in the mypressi. But the mypressi baskets definitely fit the Rossa.

As measured this morning:
mypressi basket: OD (just under the top lip): 55.2mm / ID (just under the top lip: 53.93mm
Rossa PG basket: OD (just under the top lip): 56.25mm / ID (just under the top lip): 55.03mm

The ridged basket in the photo is the Rossa; non-ridged is the mypressi...


No Espresso = Depresso