I've lost that line graph at the top of Artisan - Page 2
- MaKoMo
- Posts: 850
- Joined: 16 years ago
The time ranges used per phase for this evaluation can be configured under menu Config >> Statistics.
LMWDP #360, https://artisan-scope.org
-
- Posts: 1819
- Joined: 17 years ago
So, since this topic is ranging all around Artisan, who wants to tell me what they do with the Wheel Graph Tool ?
The various wheel graphs are interesting and pretty, but....how do you use them?
The various wheel graphs are interesting and pretty, but....how do you use them?
- Arpi
- Posts: 1124
- Joined: 15 years ago
The wheel graphs are there to select coffee flavours and aromas. But you have to make your own graph to avoid possible conflicts. For example,
https://www.scaa.org/Images/Pages/Resou ... -wheel.jpg
It could be used for other similar purposes too. For example, they are used for wine and beer too. You should be able to pick elements and send them to cupping properties (right click).
Cheers
https://www.scaa.org/Images/Pages/Resou ... -wheel.jpg
It could be used for other similar purposes too. For example, they are used for wine and beer too. You should be able to pick elements and send them to cupping properties (right click).
Cheers
-
- Posts: 1819
- Joined: 17 years ago
Exactly what I was trying to figure out.Arpi wrote:But you have to make your own graph to avoid possible conflicts. For example,
https://www.scaa.org/Images/Pages/Resou ... -wheel.jpg
Cheers
Thanks, Arpi.
Susan