Quest M3: How to mark up power and fan setting continuously on Artisan Scope - Page 2
- drgary
- Team HB
- Posts: 14372
- Joined: 14 years ago
Sorry to ask a question that may have already been answered by the link that was given. If "w" is set up as fan, do you hit the "w" key, release it, then type 50 to register a 50% fan setting?MaKoMo wrote:Did you know that you can quickly enter a special event value precisely by pressing one of the keys q,w,e,r for the four event types in order, followed by two digits (knowing that 100% cannot be entered that way, but who cares)?
Gary
LMWDP#308
What I WOULD do for a good cup of coffee!
LMWDP#308
What I WOULD do for a good cup of coffee!
- MaKoMo
- Posts: 850
- Joined: 16 years ago
If the second custom event (menu Config >> Events) is setup as fan, you hit the "w" key (during recording), release it (you will see the name of the event 2, maybe "fan" written in the message line as confirmation), press "5", release it (you will see "fan 5" in the message line as confirmation), press "0" release it (you will see "fan 50 in the message line as confirmation). If a slider for the second custom event is enabled, the slider will move to 50% and a corresponding event action will be triggered (if one is configured).
LMWDP #360, https://artisan-scope.org