Thank you, it's been a super fun journey and will be even more fun next year when we launch our new product that we have been working on for the past 4-5 years. /Sverre

Hei, It's been 10 years since I finished my prototype of a home 1kg electrical coffee roaster, with lots of help from this forum. What started out as a hobby project inspired by fellow home roasters has turned into a super fun journey. The pursuit of the ultimate coffee roaster is still going strong...

I agree and that's why we have a mechanical knob on top of the ROEST. One press on the touch screen combined with rotating the knob on the top and your in full manual control of the roast

It's been standing in a corner with christmas light decoration since december. I'm actually writing on a post about their transfeer these days. That's how i stumbeld upon this tread in the first place

Could it have been more than 4 months ago? Their probat has been disconnected since august last year. Anyways, I was only curious. We just had a photoshoot with Nordic Approach today and we will write a blog post about how they use ROEST for all their sample roasting. /Sverre

It must have been a long time ago if it was roasted on a Probat, they use 3 x ROEST sample roaster today at the Nordic Approach HQ

Heating it up higher before your first roast should help, but you might wanna try recording -everything- you do during a roast and see if there is anything you have missed

Is it possible to fix the "RampSoak ON" button for the FUJI PXR? "RampSoak Off" is working fine. Any help would be very much appreciated! Thanks for a great software! (we use it to test our prototype) /Sverre

For some reason it only reads the last ramp/soak time and temperature. We press set after each input in "set RS", then "START", then "ramp/soak ON". {image}

Once again, thank you so much for your help! There seems to be some problems when I want to "Set" the Ramp/soak. (or load it to the PID) This is the error message: "version = 0.8.0 1 18:27:16.883 Modbus Error: writeSingleRegister() CRC error: 0 ('\x00\x00') instead of 42571 ('\xa6K'). The response i...