Search found 73 matches

by eric needham
September 8th, 2022, 2:32 pm
Forum: Repairs, Restorations & Mods
Replies: 3
Views: 203

La Marzocco GS2 wiring and assembly

Next question, or at least interesting point is the lower disc that allows water to flow to brew coffee, originally had more of a slot than a single hole that would allow line pressure water to flow for pre infusion prior to pump activation. This is done by moving the lever to the spot where the hol...
by eric needham
September 5th, 2022, 9:49 pm
Forum: Repairs, Restorations & Mods
Replies: 3
Views: 203

La Marzocco GS2 wiring and assembly

Paul, Thank you so much! That helps tremendously! I do tend to think it is more complicated than it's is. Eric
Advertisement
by eric needham
September 5th, 2022, 8:08 pm
Forum: Repairs, Restorations & Mods
Replies: 3
Views: 203

La Marzocco GS2 wiring and assembly

I recently purchased a GS2 and have begun a bit of a restoration with a few updates. Here is about where I am currently, parts loosely fitted not assembled. {image} The machine has been in storage for 20 years. It was partially disassembled, with the wiring taken apart and a couple of wires missing ...
by eric needham
June 6th, 2014, 1:02 pm
Forum: Lever Espresso Machines
Replies: 17
Views: 1496

La San Marco Lever 80 no hole for water flow to groups

Pat, Thanks! and yes. I like posting these things because I always learn something, and hopefully someone else will also. Eric
by eric needham
June 4th, 2014, 3:26 pm
Forum: Lever Espresso Machines
Replies: 17
Views: 1496

La San Marco Lever 80 no hole for water flow to groups

Pic on separate post. meant to quote you. Eric
by eric needham
June 4th, 2014, 3:18 pm
Forum: Lever Espresso Machines
Replies: 17
Views: 1496

La San Marco Lever 80 no hole for water flow to groups

{image} Anyone care to venture a guess as to the group with all the mounts? The other is smooth and I think original. The one with the mounts, I am not sure of its origin
by eric needham
June 4th, 2014, 3:13 pm
Forum: Lever Espresso Machines
Replies: 17
Views: 1496

La San Marco Lever 80 no hole for water flow to groups

{image} The first pic is my other machine with the original part. The second is the machine with the newer part
by eric needham
June 4th, 2014, 3:06 pm
Forum: Lever Espresso Machines
Replies: 17
Views: 1496

La San Marco Lever 80 no hole for water flow to groups

{image} Here are a few more pics
by eric needham
June 4th, 2014, 3:03 pm
Forum: Lever Espresso Machines
Replies: 17
Views: 1496

La San Marco Lever 80 no hole for water flow to groups

Is your machine like the one in Doug Garrott's "LSM 80 rebuild photos"? If so, then your HX would feed the upper opening. I can't tell for sure to what extent that lower tube might act as a dipper on that machine. Sure is an interesting design.[/quote] Yes, is is like the one that Doug
by eric needham
June 4th, 2014, 2:51 pm
Forum: Lever Espresso Machines
Replies: 17
Views: 1496

La San Marco Lever 80 no hole for water flow to groups

{image} LSM just agreed that the parts were not finished. I will post one picture, but it is hard to see the holes. But I already have it back together and working. Eric