Had a request for a funnel for a KafaTek grinder and a dust cap/lid. I turned everything from one large block of wood. {image} {image}

No it will not. It uses a metric thread not imperial. M6'ish as I recall. If you use an imperial machine screw, you will cross-thread the hole, or if the color threads are harder than the screw, cross-thread the screw

Yes, the Fellini is used with lever machines to more liquid out of a shot. You are pre-infusing the puck then refilling the lever brew chamber with water and doing it again. A lever may only be able to push, say 20 grams of water on a single piston stroke. So if you want 30g, you have to pull a

You also did not answer the question about the coffee. There should be a 'roasted on' date. You want coffee that is 3 to 15'ish days post that roast date. If there is no roasted on, or has a 'use by' that is your first issue

Profitec Pro 400 walnut portafilter, steam/water/brew control set. The customer requested a unique steam and water control. {image}

Ironwood Burl portafilter handle for a La Marzocco. {image} {image}

Flair lever espresso machine lever end caps SWorks portafilter handles Domed KafaTek dust cap Craig Lyn 33mm single row 8 tube cellar holder Two row 16 tube holder All in spalted maple burl with a satin finish. {image} {image} {image} {image}

ACS Evo Leva portafilter, lever, and steam/water joystick controls in Olive wood. {image}

It sounds like a pump, or something is leaking like the bypass valve. I assume the machine is coming to full pressure if you do a backflush with a blind basket. Assuming it does, then it would not be a leaking OPV, just a lethargic pump, or a power issue to the pump

Olive and curly maple portafilter handles for a Decent Espresso machine. {image}