Search found 7 matches
- August 30th, 2022, 11:22 pm
- Forum: Espresso Machines
- Replies: 2247
- Views: 221802
Lelit Bianca User Experience
Is there any way to adjust the flow-control profile valve? I've had my Bianca for about 3 months, roughly 4 shots daily, almost all using the flow-control paddle. When I first got the machine, with the paddle all the way to the left, there was no water flowing through the puck -- the valve was compl...
- July 20th, 2022, 2:34 pm
- Forum: Espresso Machines
- Replies: 2247
- Views: 221802
Lelit Bianca User Experience
We all know that the hot water & steam valves can be damaged if they are over-tightened (closed), right? Right? And everyone who uses the machine (spouse, roommates, guests, etc) knows that too, right? And everyone always remembers not to over-tighten the valves, even before having had their coffee,...
- September 29th, 2013, 10:55 pm
- Forum: Espresso Machines
- Replies: 1
- Views: 383
Euro 2000 - Lack of heat/autofill after reaching operating temperature
My daily machine, a Euro 2000 Jr (very similar to an Isomac Tea) recently developed a problem. About the time the machine reaches normal idle temperature (~35 minutes), the autofill and heater stop. I've got Eric's thermometer installed, and the problem seems to happen when the thermometer reaches a...
- September 29th, 2013, 10:25 pm
- Forum: Repairs, Restorations & Mods
- Replies: 11
- Views: 2753
Euro 2000 - Rebuilding after sitting for 5 years?
I've got 2 Euro 2000s, one that was my daily machine for the last 2 years, and another that I'm in the middle of refurbing. The 'daily machine' has been reliable (until this Thursday) and consistent, after allowing for normal maintenance (pressurestat replacement, replacing gaskets, etc.). Both mach...
- September 29th, 2013, 10:19 pm
- Forum: Repairs, Restorations & Mods
- Replies: 11
- Views: 2753
Euro 2000 - Rebuilding after sitting for 5 years?
Sure, but you can bypass the fill-level sensor and allow the pump to send water out through the steam wand
- June 30th, 2010, 3:36 pm
- Forum: Espresso Machines
- Replies: 16
- Views: 6121
Euro 2000... Anyone own one?
Yes, I own one (two, actually...I'm refurbishing one, while the other is my daily use machine). I'm quite happy with it. A full line of spare parts is available from Cafetech in Canada, but I'd love to find a local (US) supplier for "soft" parts (ie., gaskets, o-rings, seals). I've got the contact i...
- March 3rd, 2010, 1:24 pm
- Forum: Cafes and Get-togethers
- Replies: 18
- Views: 903
In the Philly Area? Check out the Chestnut Hill Coffee Company!
I appreciate the care that Chestnut Hill puts into their espresso...but I don't really like their "house blend". To me, it's got flavor notes that make me think of "salty" and "leathery"...not what I want in my cup. The "Red Beard" blend sounds interesting. I'll look for it the next time I'm there, ...