Search found 502 matches
- April 9th, 2024, 2:52 pm
- Forum: Coffee Roasting
- Replies: 136
- Views: 4657
Humidity sensor on exhaust - other gas sensors ?
OK, thanks for the info. I'll probably go ahead and order the other df64parts for now. I might just buy a little aquarium pump, get some tubing and filters and give this a try and see how it goes
- April 9th, 2024, 10:28 am
- Forum: Coffee Roasting
- Replies: 136
- Views: 4657
Humidity sensor on exhaust - other gas sensors ?
Gary Did you ever publish files? Since I don't see them at grabcad, I suspect not. I'm going to order parts for your df64 designs, thought I could also order parts for this too. My plan is to stick the end of the tubing in my SCTO. I have a little outlet that I normally just block
- April 4th, 2024, 10:35 am
- Forum: Coffee Roasting
- Replies: 11
- Views: 431
High ROR at start of roast in a fluid bed
A couple of years ago I was roasting with a modded popcorn pumper, and my profiles looked very similar. ROR jumped off the chart for the first min or two, then came down to more reasonable levels. I was using the PID function in Artisan to control my pumper. I divided the roasts up with
- April 3rd, 2024, 9:32 am
- Forum: Repairs, Restorations & Mods
- Replies: 4
- Views: 117
Are all flowmeters created equal ???
From my experience adding a flowmeter to my espresso machine, they are fairly simple devices. There is paddles on a wheel the cause the wheel to move when water flows through the device. The flowmeter will output a pulse once per revolution of the wheel. So I counted the pulses to determine flow rat...
- April 1st, 2024, 4:35 pm
- Forum: Water
- Replies: 33
- Views: 847
Water, no scale? no corrosion? For reservoir espresso machines
Here is a link I saved {link}/ Gets somewhat technical. You can just just the gh/kh aquarium test kits as is if you're ok with their standard tolerance
- March 29th, 2024, 5:44 pm
- Forum: Grinders
- Replies: 2
- Views: 158
DF64 Gen 2 March 2024 Shipment Stock Burrs?
{link} They look shiny in the pics from the link
- March 29th, 2024, 1:39 pm
- Forum: Espresso Machines
- Replies: 18
- Views: 623
Lights flicker in house, when espresso machine is on (Alex Leva).
To add a little to this, while the machine is warming up, the SSR/heater are always on. You only see the lights flicker at the moment when the SSR/heater turns on. Once it is on, there is no flickering. With a PID, once the target temperature is reached, it turns the heater on and off quite
- March 26th, 2024, 9:01 am
- Forum: Lever Espresso Machines
- Replies: 2
- Views: 398
Aliexpress Lever Machine
Thread on a similar machine "Jian Yi Lever espresso machine" This one has a heater. At the prices they go for, I'd get a Flair 58 instead as it's a known quantity. Randy
- March 22nd, 2024, 11:46 am
- Forum: Buying Advice
- Replies: 3
- Views: 140
Reusable cups?
I switched from a normal ceramic coffee mug to a double walled metal cup for work. I like that this does a much better job keeping the coffee hot
- March 21st, 2024, 9:53 am
- Forum: Buying Advice
- Replies: 23
- Views: 826
The espresso journey begins...setup advice, please!
Search for "boilergate" before buying a Gaggia. In short, they added a coating to the boiler that can flake off. I wouldn't recommend a new gaggia until they really get this sorted out. Randy