Search found 1153 matches
- September 13th, 2022, 8:15 pm
- Forum: Grinders
- Replies: 7
- Views: 448
Versalab M3 with 0866 control board
I like it. We use it at work, 6-10 people every day, morning and after lunch
- September 13th, 2022, 3:29 pm
- Forum: Grinders
- Replies: 7
- Views: 448
Versalab M3 with 0866 control board
Yes, the belt is new and I cleaned the belt and pulley using isopropyl alcohol. I already had the controller (I don't know if it's the same Versalab sells but it's from Bodine). Last time I bought the belt from Versalab, I could upgrade it to the double belt and taller pulley, but I didn't as it wou...
- September 13th, 2022, 5:57 am
- Forum: Grinders
- Replies: 7
- Views: 448
Versalab M3 with 0866 control board
I read the "Versalab M3 vs. Others" again and remember the dip switches discussion. I'll try to experiment with 3,4,5 and 2,5,7. I don't understand how the 2,5,7 setting should output 130VDC if the manual says the board is 0-90 (or 0-180). Anyway, maybe I was running into a torque problem, I turn th...
- September 11th, 2022, 5:33 pm
- Forum: Grinders
- Replies: 7
- Views: 448
Versalab M3 with 0866 control board
Hello there. Long time no post here... I finally installed the 0866 bodine board I have since 2017. I have some doubts... First, the manual says only dip switches 3 and 5 should be on for the 33A3 (90/130 V) I have, not 3, 4 and 5 as AssaFL said before. Any thoughts? Probably Versalab did use
- September 11th, 2021, 4:47 pm
- Forum: Grinders
- Replies: 503
- Views: 63867
Baratza Vario Super Alignment owner experience
Hi all! Finally I tried this alignment on Mahlkonig Vario, one of first units back in the days they launched the grinder together. The macro adjustment part doesn't stay put after I screw everything back to place. Am I doing something wrong? The whole part is loose, although the brass is firm when I...
- January 23rd, 2021, 7:40 pm
- Forum: Knockbox
- Replies: 425
- Views: 49918
Bragging Rights Thread: Great Coffee Gear Scores!
You are very well served. The espresso is excellent, I had one exactly like yours and I regret selling it. At least it's with a good friend and great home barista
- January 6th, 2021, 5:28 pm
- Forum: Repairs, Restorations & Mods
- Replies: 2
- Views: 99
Looking for a replacement for this heating element 110v 1500W
It seems identical to Faema President heat element
- December 19th, 2020, 7:06 am
- Forum: Lever Espresso Machines
- Replies: 3481
- Views: 554828
Lever Espresso Machine Gallery
It's absolutely perfect! Congrats!
- November 1st, 2020, 10:16 am
- Forum: Lever Espresso Machines
- Replies: 3481
- Views: 554828
Lever Espresso Machine Gallery
No, just have to pull the cabinet - it has wheels
- November 1st, 2020, 8:44 am
- Forum: Lever Espresso Machines
- Replies: 3481
- Views: 554828
Lever Espresso Machine Gallery
Considering 5L of water and heating the group properly. For sure it's possible to speed up thing with some flushes and 3L of water, I think I managed to pull some after 30 min. The Robot workflow is around 5-10 minutes, yes! She was inside the cabinet, resting a little bit