Search found 1153 matches

by Carneiro
September 13th, 2022, 8:15 pm
Forum: Grinders
Replies: 7
Views: 447

Versalab M3 with 0866 control board

I like it. We use it at work, 6-10 people every day, morning and after lunch
by Carneiro
September 13th, 2022, 3:29 pm
Forum: Grinders
Replies: 7
Views: 447

Versalab M3 with 0866 control board

Yes, the belt is new and I cleaned the belt and pulley using isopropyl alcohol. I already had the controller (I don't know if it's the same Versalab sells but it's from Bodine). Last time I bought the belt from Versalab, I could upgrade it to the double belt and taller pulley, but I didn't as it wou...
Advertisement
by Carneiro
September 13th, 2022, 5:57 am
Forum: Grinders
Replies: 7
Views: 447

Versalab M3 with 0866 control board

I read the "Versalab M3 vs. Others" again and remember the dip switches discussion. I'll try to experiment with 3,4,5 and 2,5,7. I don't understand how the 2,5,7 setting should output 130VDC if the manual says the board is 0-90 (or 0-180). Anyway, maybe I was running into a torque problem, I turn th...
by Carneiro
September 11th, 2022, 5:33 pm
Forum: Grinders
Replies: 7
Views: 447

Versalab M3 with 0866 control board

Hello there. Long time no post here... I finally installed the 0866 bodine board I have since 2017. I have some doubts... First, the manual says only dip switches 3 and 5 should be on for the 33A3 (90/130 V) I have, not 3, 4 and 5 as AssaFL said before. Any thoughts? Probably Versalab did use
by Carneiro
September 11th, 2021, 4:47 pm
Forum: Grinders
Replies: 503
Views: 63257

Baratza Vario Super Alignment owner experience

Hi all! Finally I tried this alignment on Mahlkonig Vario, one of first units back in the days they launched the grinder together. The macro adjustment part doesn't stay put after I screw everything back to place. Am I doing something wrong? The whole part is loose, although the brass is firm when I...
by Carneiro
January 23rd, 2021, 7:40 pm
Forum: Knockbox
Replies: 425
Views: 49806

Bragging Rights Thread: Great Coffee Gear Scores!

You are very well served. The espresso is excellent, I had one exactly like yours and I regret selling it. At least it's with a good friend and great home barista
by Carneiro
January 6th, 2021, 5:28 pm
Forum: Repairs, Restorations & Mods
Replies: 2
Views: 97

Looking for a replacement for this heating element 110v 1500W

It seems identical to Faema President heat element
by Carneiro
December 19th, 2020, 7:06 am
Forum: Lever Espresso Machines
Replies: 3480
Views: 553140

Lever Espresso Machine Gallery

It's absolutely perfect! Congrats!
by Carneiro
November 1st, 2020, 10:16 am
Forum: Lever Espresso Machines
Replies: 3480
Views: 553140

Lever Espresso Machine Gallery

No, just have to pull the cabinet - it has wheels
by Carneiro
November 1st, 2020, 8:44 am
Forum: Lever Espresso Machines
Replies: 3480
Views: 553140

Lever Espresso Machine Gallery

Considering 5L of water and heating the group properly. For sure it's possible to speed up thing with some flushes and 3L of water, I think I managed to pull some after 30 min. The Robot workflow is around 5-10 minutes, yes! She was inside the cabinet, resting a little bit