Wow, I just received a 22lbs box of the Crown Jewel Ethiopian Decaf, and the bag was split in the box at the same place. I will notify Royal. It is obviously a bag defect they should be aware of. I picked up every one of those precious beans off of the floor with no worries... Now

I would like to participate. Dave

I would love to participate. Dave

My pump pressure is at 24% Dave

I just measured my Slayer at full brew position. I get ~245g in 30sec. Cheers, Dave

I have a Huky(original non-T version) with a solid drum and 2mm thermocouples in BT and ET positions. I have had good success achieving very consistent and predictable results with the following routine. My warm-up routine is to heat the roaster at .5kpa gas with no fan (I turn off the fan and close...

I have had a similar positive experience with the IMS nanoquartz screen. I have been using it on my Slayer for about 4 months with no noticeable deterioration of the coating. I backflush with detergent and lightly scrub will a Pallo group brush regularly. I use the machine daily for ~ 4 drinks. I ha...

Hi. My wife and I were in Amsterdam in October. We hit 3 shops, and they were all great: Naked Espresso - Close to the central Station. Has a Slayer Steam. Our Barista was competing in the Netherlands Barista Championship. White Label Coffee - Great house roasted coffee and great Baristas. Scandinav...

There is a thread on this topic if you search "Backflush with or without shower screen". I follow Slayer's recommendation to leave a screen in place during a backflush. One poster also mentions LM in Florence as recommending the same. I am not sure I fully buy into a severe risk in backflushing with...

From the picture, it looks like the regulator screws into the internal threads on the propane tank. If so, I believe those are reverse threaded. You loosen the connection by turning clockwise. (Reverse of normal) If you used a lot of force turning it counter-clockwise trying to loosen it, that might...