Search found 729 matches

by danetrainer
February 28th, 2024, 6:49 pm
Forum: Buying Advice
Replies: 8
Views: 187

Mag funnel for Mini Vivaldi?

I hope this simplifies things for you, this is what I measured. The bottom has an exterior ridge that fits down over the outside of the filter basket. It measures 66mm The inner opening is 57mm The height is 25mm
by danetrainer
February 27th, 2024, 9:33 am
Forum: Grinders
Replies: 200
Views: 19606

Kafatek Monolith Conical has gone through a major change...

Michael, you know you *need* one His flat he says has the Mythos titanium coated burrs, I had the flat grinder for two years and had both those burrs, then replaced them with SSP red speed burrs the second year. I don't have any ability now to do a side by side taste
Advertisement
by danetrainer
February 27th, 2024, 9:19 am
Forum: Grinders
Replies: 7
Views: 553

Kingrinder K4 or K6 - beginner buying advice

I agree that you likely will notice a difference but the K4 sounds like the right grinder for your usage to me. The K6 will highlight better clarity with very light roasts, the K4 still produces very nice notes for espresso and is my go to grinder on the road when I typically have a range of light m...
by danetrainer
February 27th, 2024, 9:08 am
Forum: Buying Advice
Replies: 8
Views: 187

Mag funnel for Mini Vivaldi?

I have the Sworks one for my 54mm LSM group and I was thinking again this morning how much I love it and need some for my other group sizes. It has strong magnets and I dose out of the pf without a spring, and there are never any accidents or fumbling around between grinder and wdt, etc. It requires
by danetrainer
December 24th, 2023, 10:10 am
Forum: Coffees
Replies: 10
Views: 569

Special coffee beans for the holidays?

Having Hydrangea Zeo Gesha and B&W Benjamin Paz Gesha today...Manhattan Luna and Pepe Jijon waiting another day or two
by danetrainer
December 9th, 2023, 9:43 am
Forum: Buying Advice
Replies: 22
Views: 1027

A second grinder to the EG1

I will agree with Erik and John, being you have the EG1 put a set of ultra burrs in it and use it for brew and occasional light roast espresso. Kafatek MC6 for any range otherwise for espresso. If you are purely light, filter roast espresso the MAX with SLM burrs would be best and paired with an MC6...
by danetrainer
December 7th, 2023, 7:47 am
Forum: Repairs, Restorations & Mods
Replies: 3
Views: 84

La Marzocco GS3 Safety Valve Protection T.3.004 PVC Hose replacement

I had the same issue with my Slayer, the pvc hose had contact with a hot copper supply tube and caused it to finally leak at that spot, I was finding occasional spots of water under the machine. I replaced it with a silicone hose and as already said, just be careful that the routing allows it not to...
by danetrainer
December 7th, 2023, 7:22 am
Forum: Espresso Machines
Replies: 5
Views: 430

Emanuale Espresso

Shipping policy doesn't include the US, and being pre order status that may likely change when production gets going and it's a success in the intended markets?
by danetrainer
November 17th, 2023, 10:55 am
Forum: Lever Espresso Machines
Replies: 29
Views: 4307

SWORKSDESIGN 49.7mm Puck Disk Screen Experience

Yes, it works great in that IMS basket I use it everyday with my Cremina. Also the group screen & piston stay incredibly clean
by danetrainer
November 16th, 2023, 11:42 am
Forum: Buy/Sell
Replies: 0
Views: 825

[SOLD] Londinium R in Florida

Londinium R with adjustable PI, beautiful machine with very low use, I have multiple other machines and this is used mostly for entertaining and milk based drinks. It is 220 volt and comes with the 115/220 voltage converter that it has always been used with, the combination has worked great in 3 sep...