Search found 81 matches
- November 7th, 2010, 8:38 am
- Forum: Espresso Machines
- Replies: 5
- Views: 1581
How to drain Quickmill Anita boiler..
Thanks for the tips. I bought my machine in March 08' and the plug I took off is certainly a drain plug. You can use an allen wrench to get it off but I didn't know this until I got it off
- November 6th, 2010, 6:14 pm
- Forum: Espresso Machines
- Replies: 5
- Views: 1581
How to drain Quickmill Anita boiler..
Is there a way to get all the water out of the machine? I still see water in the plastic lines and also thinking there may be water trapped within the machine somewhere. Machine will be going up for sale and would like to get all the water out so it doesn't freeze. Freeze = VERY BAD!
- November 6th, 2010, 4:30 pm
- Forum: Espresso Machines
- Replies: 5
- Views: 1581
How to drain Quickmill Anita boiler..
Ok so I just took a chance and pulled that round plug-that was in fact the drain plug. It looks as though I should put a new gasket on it. Does it have to be OEM or can I go to the hardware and pick one up? It's a green rubber gasket. The original may work
- November 6th, 2010, 4:11 pm
- Forum: Espresso Machines
- Replies: 5
- Views: 1581
How to drain Quickmill Anita boiler..
All, I've done a thorough search of the forums and cannot find an answer to a question. I know I can drain most of the water out using the water tap but there is supposedly a drain plug on the bottom of Anita. The bolt thru the bottom in the
- September 14th, 2010, 9:30 pm
- Forum: Grinders
- Replies: 8
- Views: 892
Need Mazzer Major electrical help (older model)
I am selling the grinder and the buyer wants everything hooked back up. They are the doser wires I am trying to hook back up. I have it jumpered out, I can't remember how to hook it back up the right way... Ron
- September 14th, 2010, 7:12 pm
- Forum: Grinders
- Replies: 8
- Views: 892
Need Mazzer Major electrical help (older model)
Major wiring schematic anyone, anyone? Ron
- September 13th, 2010, 9:07 pm
- Forum: Grinders
- Replies: 8
- Views: 892
Need Mazzer Major electrical help (older model)
Thanks everyone. I figured out where everything goes except for the wire connections. Hopefully the correct schematic will turn up. It looks like the Super jolly schematic is a little different than what I have. Not sure if this would make a difference, but my Major is a Major Luigi which I believe ...
- September 13th, 2010, 6:42 pm
- Forum: Grinders
- Replies: 8
- Views: 892
Need Mazzer Major electrical help (older model)
All, I want to put my doser back on the Major and didn't do a good job marking things when I took it apart 4 years ago. So...I need to know how the two wires connect inside the major that go to the grind-stop trigger(or whatever you call that thing)
- March 27th, 2010, 6:33 pm
- Forum: Buying Advice
- Replies: 10
- Views: 3696
One Grinder for French Press and Espresso: recommendation?
It's simple really. Buy the Vario. Why? You will end up paying more if you buy one grinder now and then have to get a 'espresso' grinder. With this grinder you are essentially done with ever having to buy another grinder(unless you read these forums ALOT and get upgraditis or the grinder breaks). I ...
- March 15th, 2010, 3:30 pm
- Forum: Repairs, Restorations & Mods
- Replies: 4
- Views: 1547
Quickmill Anita leaking OPV..my fault..
Everything is running smoooooooth! No more squealing from the OPV and no more leaking. Thanks Eric, Ron