Search found 1405 matches

by stefano65
February 2nd, 2024, 12:07 pm
Forum: Lever Espresso Machines
Replies: 6
Views: 145

La Pavoni PreMill Grouphead Needed

Cool looks like you found one, if works eventually let me know so I'll remove you from the list, ciao Stefano
by stefano65
February 2nd, 2024, 9:43 am
Forum: Lever Espresso Machines
Replies: 3
Views: 115

La Pavoni 1990 blows fuse whenever plugged in

PS 2 not suggested and only for short testing purpose you an by-pass it until the replacement disclaimer NO WATER in boiler and Kabummmmmmm so eyes on the level pre-during and after a shot
Advertisement
by stefano65
February 2nd, 2024, 9:39 am
Forum: Lever Espresso Machines
Replies: 3
Views: 115

La Pavoni 1990 blows fuse whenever plugged in

In a nut-shell: I'm in the process to "design a small bracket that will attach to the bolt of the flange (one of them that will clear the Heating element post) so that will allow the p-14 currently sold (thanks for the link by the way) to be mounted on safely s/s material due to the flexibility and ...
by stefano65
January 23rd, 2024, 6:22 pm
Forum: Espresso Machines
Replies: 8
Views: 300

Portafilter gauge

Perhaps the product changed but some years back upon testing a sample one the temp was not that accurate, again, this was few years back and we decided not to bring them in stock
by stefano65
January 15th, 2024, 5:20 pm
Forum: Repairs, Restorations & Mods
Replies: 1
Views: 63

Rocket Appartamento Pump Issue

Water and pump not kicking in aka no noise is different from a pump not priming, IF you are in the opening the machine mode: locate the resettable thermostat or the heating element and first remove the current to reaching it. Then if the pump is NOT making any noise at all no humming nothing, you sh...
by stefano65
January 11th, 2024, 6:55 pm
Forum: Repairs, Restorations & Mods
Replies: 1
Views: 24

Boiler Overfill Problem - Fiorenzato Bricoletta

Locate the probe wire, making sure you are not grounding to the machine yourself (not to be risk of shocks just so you don't close the circuit) after few seconds, is the autofill kicking in?
by stefano65
January 9th, 2024, 1:42 pm
Forum: Repairs, Restorations & Mods
Replies: 4
Views: 99

1998 Elektra A3 resuscitation attempt

As mentioned by Guido and most likely, when they look that bad they will most likely disintegrate upon touching them, replacing them will be a suggestion
by stefano65
January 8th, 2024, 4:36 pm
Forum: Lever Espresso Machines
Replies: 2
Views: 130

La Pavoni Boiler Pressure Gauge Dimensions

In a nut shell: an Europiccola that was from factory without a gauge will need one fo the adapter (11 or 12mm based on the age) as for other vendors, we have a US made version as well (infact 2 miles down the orad form us) in both s/s and brass
by stefano65
January 5th, 2024, 2:50 pm
Forum: Lever Espresso Machines
Replies: 11
Views: 328

La Pavoni Portafilter without Clip

Thumby thumby as well{video}
by stefano65
January 5th, 2024, 1:55 pm
Forum: Repairs, Restorations & Mods
Replies: 9
Views: 287

Rewiring old espresso machine best practices?

Hello Christian, I'm assuming it's you correct? I was just on HB and notice this post not to try to sell you even more that you are spending already but we might be able to get from Elektra the complete wiring hardness, will be of course for a newer version but... it might be as close as possible and