Search found 1405 matches
- February 2nd, 2024, 12:07 pm
- Forum: Lever Espresso Machines
- Replies: 6
- Views: 149
La Pavoni PreMill Grouphead Needed
Cool looks like you found one, if works eventually let me know so I'll remove you from the list, ciao Stefano
- February 2nd, 2024, 9:43 am
- Forum: Lever Espresso Machines
- Replies: 3
- Views: 117
La Pavoni 1990 blows fuse whenever plugged in
PS 2 not suggested and only for short testing purpose you an by-pass it until the replacement disclaimer NO WATER in boiler and Kabummmmmmm so eyes on the level pre-during and after a shot
- February 2nd, 2024, 9:39 am
- Forum: Lever Espresso Machines
- Replies: 3
- Views: 117
La Pavoni 1990 blows fuse whenever plugged in
In a nut-shell: I'm in the process to "design a small bracket that will attach to the bolt of the flange (one of them that will clear the Heating element post) so that will allow the p-14 currently sold (thanks for the link by the way) to be mounted on safely s/s material due to the flexibility and ...
- January 23rd, 2024, 6:22 pm
- Forum: Espresso Machines
- Replies: 8
- Views: 312
Portafilter gauge
Perhaps the product changed but some years back upon testing a sample one the temp was not that accurate, again, this was few years back and we decided not to bring them in stock
- January 15th, 2024, 5:20 pm
- Forum: Repairs, Restorations & Mods
- Replies: 1
- Views: 67
Rocket Appartamento Pump Issue
Water and pump not kicking in aka no noise is different from a pump not priming, IF you are in the opening the machine mode: locate the resettable thermostat or the heating element and first remove the current to reaching it. Then if the pump is NOT making any noise at all no humming nothing, you sh...
- January 11th, 2024, 6:55 pm
- Forum: Repairs, Restorations & Mods
- Replies: 1
- Views: 28
Boiler Overfill Problem - Fiorenzato Bricoletta
Locate the probe wire, making sure you are not grounding to the machine yourself (not to be risk of shocks just so you don't close the circuit) after few seconds, is the autofill kicking in?
- January 9th, 2024, 1:42 pm
- Forum: Repairs, Restorations & Mods
- Replies: 4
- Views: 99
1998 Elektra A3 resuscitation attempt
As mentioned by Guido and most likely, when they look that bad they will most likely disintegrate upon touching them, replacing them will be a suggestion
- January 8th, 2024, 4:36 pm
- Forum: Lever Espresso Machines
- Replies: 2
- Views: 135
La Pavoni Boiler Pressure Gauge Dimensions
In a nut shell: an Europiccola that was from factory without a gauge will need one fo the adapter (11 or 12mm based on the age) as for other vendors, we have a US made version as well (infact 2 miles down the orad form us) in both s/s and brass
- January 5th, 2024, 2:50 pm
- Forum: Lever Espresso Machines
- Replies: 11
- Views: 336
La Pavoni Portafilter without Clip
Thumby thumby as well{video}
- January 5th, 2024, 1:55 pm
- Forum: Repairs, Restorations & Mods
- Replies: 9
- Views: 295
Rewiring old espresso machine best practices?
Hello Christian, I'm assuming it's you correct? I was just on HB and notice this post not to try to sell you even more that you are spending already but we might be able to get from Elektra the complete wiring hardness, will be of course for a newer version but... it might be as close as possible and