Search found 21 matches
- August 7th, 2023, 1:09 pm
- Forum: Marketplace
- Replies: 39
- Views: 1904
What Size of Bags of Coffee Are Best For You?
Hi, I'm a fan of 16 - 12oz. The trend toward 10oz (and sub 10oz!) bags is a problem of shrinkflation. Especially when measurement units on packaging are changed such that a former 12oz bag becomes a 300g bag. I get that specialty coffee prices are rising but hiding price increases in shrinking bags ...
- June 18th, 2023, 12:37 am
- Forum: Buy/Sell
- Replies: 0
- Views: 1172
[SOLD] Quickmill Andreja Premium (SF Bay Area)
Help me find a home for my daily driver! Originally purchased from Chris Coffee 10 years ago, I've pulled 2 shots a day over the entire life of the machine. The machine has been routinely backflushed with cafiza and also descaled every year. The machine was overhauled at Chris Coffee 5 years ago. Th...
- September 2nd, 2022, 9:03 pm
- Forum: Espresso Machines
- Replies: 2
- Views: 285
E61 mushroom O-ring dimensions
Does anyone know the dimensions of an E61 mushroom o-ring? I'm having a bit of an unusual problem. I recently descaled my machine and decided to replace the teflon seals and o-ring in the grouphead. I purchased a re-build kit and all went well until I tried to reinstall the mushroom. With the new o-...
- April 23rd, 2017, 11:12 am
- Forum: Espresso Machines
- Replies: 23
- Views: 2555
Wanted: long term reliability reports
Andreja premium purchased from Chris Coffee nearly 10 years ago now. Component replacement (capacitor) on the controller board last year. Full service with Chris Coffee in 2015. Have only replaced incidental parts beyond that (group head gasket, water tank floats). Very happy
- January 1st, 2012, 4:25 pm
- Forum: Cafes and Get-togethers
- Replies: 12
- Views: 1228
Disneyland, Anaheim Good Espresso Bar?
Hi, Not as close to Anaheim as you might like but I think Portola coffee is good. {link}
- October 14th, 2011, 12:57 am
- Forum: Espresso Machines
- Replies: 10
- Views: 940
Andreja Premium - brewhead doesn't warm fully
Ok, replacing the brew valve didn't do the trick. Next stop OPV valve gasket
- October 1st, 2011, 4:22 pm
- Forum: Espresso Machines
- Replies: 10
- Views: 940
Andreja Premium - brewhead doesn't warm fully
Here is an intermediate update. I called the service group at Chris' Coffee and they suggested checking for scale. I pulled the mushroom and found essentially no scale or other debris in the gicleur screen. So this doesn't seem to be the problem. However, the brew valve seals and o-ring on the mushr...
- August 16th, 2011, 12:53 am
- Forum: Espresso Machines
- Replies: 10
- Views: 940
Andreja Premium - brewhead doesn't warm fully
Hi, Ok! After four years of daily use I've run into my first problem that I'm not sure how to diagnose. I have my machine on a timer and under normal circumstances, the brewhead reaches 220 degrees by the time I'm ready to use it each morning (2 hour warm up). However, recently the brewhead has
- May 4th, 2008, 11:56 pm
- Forum: Repairs, Restorations & Mods
- Replies: 2
- Views: 237
Leak from OPV tubing (again), need solution
Hi, Same thing with my Andreja! Some types of tubing are much more prone to axial splitting especially if it is not trimmed perfectly flush when it it pushed onto a fitting. You may have some success using a brand new razor blade to make a new cut. I ultimately went to Home Depot and purchased a
- March 21st, 2008, 12:25 am
- Forum: Tips and Techniques
- Replies: 18
- Views: 1256
Quickmill Andreja Premium - slowing temperature rebound
Hi, I'm back with info and a call for more info. I've descaled my machine again and not found that it has improved things at all for me. I was a bit skeptical that I've got any serious scale since when I pulled the mushroom during my first descaling adventure, I didn't see even a hint of