Search found 79 matches
- November 28th, 2023, 5:35 pm
- Forum: Repairs, Restorations & Mods
- Replies: 13
- Views: 426
Mahlkönig K30 not grinding
I had a K30 do the same thing to me a couple years ago. I opened it up and reseated all the connectors that I could find. Fixed
- October 4th, 2023, 6:24 pm
- Forum: Grinders
- Replies: 4
- Views: 430
Mahlkonig E65/80 GBW hopperless height and neck design
The E65GBW will be higher than the E65S. I'm at work but will post the height of my E65GBW tomorrow
- April 13th, 2023, 8:34 am
- Forum: Buying Advice
- Replies: 14
- Views: 635
ECM Synchronika - I expected better for support!
It's this kind of service that keeps me coming back to idrinkcoffee
- January 27th, 2023, 6:20 pm
- Forum: Grinders
- Replies: 2570
- Views: 324310
Lagom P64 Flat (Option-O)
In Canada, my dealer expects their arrival imminently. That probably bodes well for everyone expecting a P64
- October 1st, 2022, 7:39 pm
- Forum: Repairs, Restorations & Mods
- Replies: 11
- Views: 433
Izzo Alex Duetto dead in the water
I had a Gicar fry on me once. I can't recall if it was my QM Andreja, or the subsequent Alex Duetto. What I do remember, though, is the $300 repair bill. Good luck, ten years is a good stretch
- March 15th, 2022, 6:10 am
- Forum: Repairs, Restorations & Mods
- Replies: 10
- Views: 261
Mahlkonig K30 Vario Intermittent Grind Operation
I had an intermittent issue some time ago. I opened up the grinder and reseated all the connectors on the terminal on the right hand side. The problem never reoccurred
- February 24th, 2021, 10:31 pm
- Forum: Grinders
- Replies: 23
- Views: 1777
Mahlkönig K30 barista mode firmware software update success
No, that's okay. Though I would like to know how to do the flash
- February 24th, 2021, 5:32 pm
- Forum: Grinders
- Replies: 23
- Views: 1777
Mahlkönig K30 barista mode firmware software update success
Did the shot counter reset with the update?
- August 20th, 2020, 10:59 pm
- Forum: Buying Advice
- Replies: 9
- Views: 1260
US customers buy from idrinkcoffee.com
I'll also vouch for idrinkcoffee. I've bought two grinders and my Alex Duetto III from them. Service has always been top notch
- February 26th, 2018, 5:58 pm
- Forum: Coffees
- Replies: 426
- Views: 28201
Canadian Roasters: Canucks...What are you drinking?
It's the first time I hear of these guys. Thanks for posting, I be sure to try some