Search found 554 matches
- April 9th, 2024, 5:44 am
- Forum: Lever Espresso Machines
- Replies: 5
- Views: 213
Conti Prestina 6 or 9 bar spring?
I can count 9 coils, so it looks like the weaker spring
- April 9th, 2024, 12:16 am
- Forum: Lever Espresso Machines
- Replies: 5
- Views: 213
Conti Prestina 6 or 9 bar spring?
"Vintage Lever Spring Specifications" The weaker spring has an outside diameter of 52mm and has 9 coils
- March 30th, 2024, 12:56 am
- Forum: Lever Espresso Machines
- Replies: 41
- Views: 1424
Red/brown water when emptying La Pavoni Europiccola boiler
Hi Bob That must be really frustrating! There must still be something in there rusting away...very slowly. I suppose if you tipped out old water and started with a fresh charge each time that you used the machine it would be ok taste-wise
- March 29th, 2024, 5:04 am
- Forum: Lever Espresso Machines
- Replies: 41
- Views: 1424
Red/brown water when emptying La Pavoni Europiccola boiler
Hi Bobsy Do you have an update on the discoloured water cause/source? Cheers, Paolo
- February 9th, 2024, 5:15 am
- Forum: Grinders
- Replies: 868
- Views: 114386
New Timemore Sculptor Grinders 064 064s 078 078s
What speed are you using? I found inconsistency in times and flow when I was using higher speeds (1200-1400rpm) for espresso. It was frustrating. As soon as I turned it down to 800 rpm both the flow and times became consistent. I do hot starts and dump the beans...getting fabulous results. I see no ...
- January 27th, 2024, 3:03 am
- Forum: Lever Espresso Machines
- Replies: 24
- Views: 974
Nurri Leva firmware updating
Hi Simon I will post the differences that I find after I try the new PID that will be coming shortly
- January 20th, 2024, 4:18 pm
- Forum: Lever Espresso Machines
- Replies: 24
- Views: 974
Nurri Leva firmware updating
Thanks for the gentle push, Loonster! And many thanks for contacting Antonio too, Primacog. I reached out to Antonio and we spoke yesterday. He is sending a new module (with the current firmware) either directly to me or to the Australian agent for Nurri machines..... at no cost to me. I am very hap...
- January 19th, 2024, 6:31 pm
- Forum: Lever Espresso Machines
- Replies: 24
- Views: 974
Nurri Leva firmware updating
I didn't follow up on this. I shudder to think
- January 18th, 2024, 3:54 pm
- Forum: Lever Espresso Machines
- Replies: 24
- Views: 974
Nurri Leva firmware updating
I offered to send the control/PID module to Antonio so that he could update the firmware but he said that it would be easier if I bought a new controller/PID module. I am the original owner of this machine. I have had it for a year
- January 18th, 2024, 5:56 am
- Forum: Lever Espresso Machines
- Replies: 24
- Views: 974
Nurri Leva firmware updating
Yes...tried both. It was suggested by Antonio that it would be easier if I bought an updated module