Search found 550 matches
- February 9th, 2024, 5:15 am
- Forum: Grinders
- Replies: 868
- Views: 113269
New Timemore Sculptor Grinders 064 064s 078 078s
What speed are you using? I found inconsistency in times and flow when I was using higher speeds (1200-1400rpm) for espresso. It was frustrating. As soon as I turned it down to 800 rpm both the flow and times became consistent. I do hot starts and dump the beans...getting fabulous results. I see no ...
- January 27th, 2024, 3:03 am
- Forum: Lever Espresso Machines
- Replies: 24
- Views: 958
Nurri Leva firmware updating
Hi Simon I will post the differences that I find after I try the new PID that will be coming shortly
- January 20th, 2024, 4:18 pm
- Forum: Lever Espresso Machines
- Replies: 24
- Views: 958
Nurri Leva firmware updating
Thanks for the gentle push, Loonster! And many thanks for contacting Antonio too, Primacog. I reached out to Antonio and we spoke yesterday. He is sending a new module (with the current firmware) either directly to me or to the Australian agent for Nurri machines..... at no cost to me. I am very hap...
- January 19th, 2024, 6:31 pm
- Forum: Lever Espresso Machines
- Replies: 24
- Views: 958
Nurri Leva firmware updating
I didn't follow up on this. I shudder to think
- January 18th, 2024, 3:54 pm
- Forum: Lever Espresso Machines
- Replies: 24
- Views: 958
Nurri Leva firmware updating
I offered to send the control/PID module to Antonio so that he could update the firmware but he said that it would be easier if I bought a new controller/PID module. I am the original owner of this machine. I have had it for a year
- January 18th, 2024, 5:56 am
- Forum: Lever Espresso Machines
- Replies: 24
- Views: 958
Nurri Leva firmware updating
Yes...tried both. It was suggested by Antonio that it would be easier if I bought an updated module
- January 18th, 2024, 2:59 am
- Forum: Lever Espresso Machines
- Replies: 24
- Views: 958
Nurri Leva firmware updating
Thanks...great to know that it can be done. Has any Aussie owner had this update carried out? If so...can you please tell me who can do it?
- January 17th, 2024, 11:29 pm
- Forum: Lever Espresso Machines
- Replies: 24
- Views: 958
Nurri Leva firmware updating
How did you get it?
- January 17th, 2024, 10:13 pm
- Forum: Lever Espresso Machines
- Replies: 24
- Views: 958
Nurri Leva firmware updating
Has anyone with a Nurri leva from the first few batches (a year old or older) managed to get the firmware updated for their PID/controller?
- January 17th, 2024, 5:56 pm
- Forum: Lever Espresso Machines
- Replies: 42
- Views: 2475
ACS Vesuvius Evo Leva vs. Nurri L-Type Leva
This is well worth a read- "Strega-fying my Brugnetti Aurora, AKA a non-invasive way to add group heater to any lever machine" With this mod, group heating time is reduced to 20 minutes. Thoroughly recommended!