Search found 185 matches

by thm655321
January 21st, 2021, 11:38 pm
Forum: Espresso Machines
Replies: 2246
Views: 221365

Lelit Bianca User Experience

{image} Any reason why my pressure gauge shows positive pressure when not brewing rather that sitting on the little stop bar beside the "0"? It worked fine before but just noticed over the last week that it doesn't reset to zero. Do you think this would affect actual readings during brew?
by thm655321
January 9th, 2021, 4:56 pm
Forum: Espresso Machines
Replies: 2246
Views: 221365

Lelit Bianca User Experience

Why can I find longer feet like these? Perhaps not quite this long, but similar. Thanks
Advertisement
by thm655321
December 20th, 2020, 7:53 pm
Forum: Espresso Machines
Replies: 2246
Views: 221365

Lelit Bianca User Experience

Don, you are the man! I am plumbed in so I never even look at the water reservoir that is tucked away in the basement. I ended up using the entire tube from the reservoir rather than cutting it and I was able to slip the end on to the nipple of the safety valve using some food
by thm655321
December 19th, 2020, 5:36 pm
Forum: Espresso Machines
Replies: 2246
Views: 221365

Lelit Bianca User Experience

Update on steam boiler safety valve replacement. So I had to take off a few things to get at it but the steam safety valve has been replaced. However, when I pulled gently on the silicone tube to detach it it just broke off instead at the nipple. No problem, just a shorter tube right? It
by thm655321
December 10th, 2020, 10:56 pm
Forum: Espresso Machines
Replies: 2246
Views: 221365

Lelit Bianca User Experience

Yes, Safety Valve assembly (of which PN 9700050 is a part). Water begins to be expelled by the safety valve within seconds of the anti-vacuum valve closing. At that point the steam boiler is at 0 bar. Water continues to be expelled thereafter, regardless of boiler pressure. The repair person at my d...
by thm655321
December 8th, 2020, 3:19 pm
Forum: Espresso Machines
Replies: 2246
Views: 221365

Lelit Bianca User Experience

Thanks for the detailed reply Don, very useful. With the top off of the machine it is clear that the excess water and steam is not coming from the anti-vacuum valve but from the safety valve on the steam boiler. Any thoughts on that one?
by thm655321
December 6th, 2020, 7:06 pm
Forum: Espresso Machines
Replies: 2246
Views: 221365

Lelit Bianca User Experience

As a test I have turned down the steam boiler temperature to as low as 1 bar and I still have steam and water coming out, just less than at higher temperatures. Do you really have to use Puly Descaler Espresso - Liquid as Lelit has stated in their descaling instructions? I cannot find it anywhere in...
by thm655321
December 2nd, 2020, 6:14 pm
Forum: Espresso Machines
Replies: 2246
Views: 221365

Lelit Bianca User Experience

I have a couple of issues that have cropped up that I am looking for some advice on solving. First starting a few weeks ago the hot water want would continue to drip after being used. Not always but some of the time. Now in addition to that the bottom of the group (not sure what to
by thm655321
September 23rd, 2020, 9:30 pm
Forum: Coffees
Replies: 298
Views: 13786

Canadian Roaster Recommendations

About three years ago I had tried basically every Toronto roaster looking for an excellent espresso that also made good drip coffee (which my wife likes in the morning). I didn't find one, although I did enjoy lots of good espresso along the way. One day my wife mentioned that there was a new cafe a...
by thm655321
September 22nd, 2020, 10:41 pm
Forum: Coffees
Replies: 298
Views: 13786

Canadian Roaster Recommendations

I've mentioned them before, but I highly recommend Hale Coffee in Toronto. I personally by 5 lb. bags at a time. {link}