- Chris Baca, on the Dialed Tamper #hks

A pretty reasonable summary article has been published at phys.org if you're like me and found the original article a bit of a slog with all the genetics terminology. {link} I think that this article better conveys what a potential breakthrough this research may be

I think that the 40011 had programmable profiles and the 40010 did not. My collection of iRoasts are packed up for a move so I can't check

AI-developed coffee blend: - article continues at {link}

Note that this is only(AFAIK) for the "Select" models, which have a switch with half- and full- coffee pot icons. IIRC, other models have a high/low switch for the hotplate and the electric switch has half- and full-filled circle icons. In addition, some models - but not the "Select" - have a manual...

29 minutes long; - review of history for the first six minutes; - 12:23-14:00 for why cone burrs should/must wobble, a.k.a., was James Hoffmann wrong in his Key review? {video}April 1, 2011 announcement of the Pharos: "Pharos manual grinder by Orphan Espresso"

FYI for Canadians: the pre-order is now live at EightOunce in Calgary. $499CAD (same price as the Ratio 6). No free coffee, but a very good USD:CAD exchange rate and about $10 in points off a future purchase from EightOunce (if you sign up to EightOunce's loyalty program). {link}

I was thinking that a strap wrench would let you determine how long a lever would be needed. I had a similar issue with the knob on my Elektra Micro Casa a Leva, and I was able to use a wrench. Eventually I replaced the sealing washer with a soft o-ring/washer that needs very little effort to seal. ...

There is washing green coffee and also rehydrating green coffee, but my guess is that the pic above is steeping white coffee

I ran my gauge underneath because the mount that holds the Gicar brainbox could be shifted slightly and the chassis bent a bit with needlenose pliers for clearance for the pipe to the gauge (with some tape wrapped around the pipe for protection). Note that I used the bottom port and a 90° elbow for ...