Search found 359 matches
- January 7th, 2024, 12:15 pm
- Forum: Repairs, Restorations & Mods
- Replies: 8
- Views: 479
La Marzocco Linea Mini steam wand tip removal
It's a normal thread. Counter clockwise to unscrew
- January 7th, 2024, 12:11 pm
- Forum: Repairs, Restorations & Mods
- Replies: 6
- Views: 83
Help, LSM SM90 grinder conversion to single doser!
Looks like you need to pry off the plastic piece thats sitting on the bottom of the doser. Or unscrew it out by that bronze colored nut in the middle
- March 27th, 2023, 7:16 am
- Forum: Repairs, Restorations & Mods
- Replies: 22
- Views: 988
Nuova Simonelli Mac Digit Restoration Journey
To get the pump going you could place it fitting-side down in a small pot of strong citric acid (or other descaling solution) and use a hand drill to cycle the pump every 10 minutes. Don't submerge the whole pump but just enough to cover the incoming and outgoing openings. I'd do this for a good hou...
- June 18th, 2022, 4:43 pm
- Forum: Repairs, Restorations & Mods
- Replies: 7
- Views: 184
Mahlkonig K30 Vario Grind Enigma
Unfortunatly this seems to be rathwr common. Search Google for "k30 won't grind fine enough" and you'll find many threads about it. For ex: "Mahlkonig K30 ES problems - Not fine enough for espresso" I've seen it first hand as well with a K30 ES with the old style grind chamber. I ended up replacing ...
- February 4th, 2022, 11:57 pm
- Forum: Lever Espresso Machines
- Replies: 2
- Views: 281
Citric acid concentration to gently clean (but not de-scale) boiler
You might run into problems with desacling without removing the boiler. If you don't rinse the boiler very thouroughly after descaling you can get chunks of scale getting stuck in various places. If the boiler has a valve on the bottom to easily drain it, you might be fine. 10g/L is pretty standard ...
- January 14th, 2022, 2:36 pm
- Forum: Espresso Machines
- Replies: 8032
- Views: 1323912
Post a pic of your home espresso setup...
Very nice! Did you make those parts yourself?
- December 30th, 2021, 4:13 am
- Forum: Repairs, Restorations & Mods
- Replies: 7
- Views: 870
New La Marzocco Vacuum Breaker (B.2.029)
How old is the o-ring? You should try to dismantle the valve and give it a good clean if it's giving you troublem
- November 28th, 2021, 7:32 am
- Forum: Repairs, Restorations & Mods
- Replies: 31
- Views: 1133
Help! Lower Burr Carrier Bolt Removal on Rio Super Automatic (aka Mazzer Major)
Yes if you use plastic or wood you're less likely to dent the fins but I imagine they can still snap if you really lean into it
- November 27th, 2021, 4:20 pm
- Forum: Repairs, Restorations & Mods
- Replies: 31
- Views: 1133
Help! Lower Burr Carrier Bolt Removal on Rio Super Automatic (aka Mazzer Major)
Have you tried putting a metal rod (solid screw driver) in through the chute wedged under the burr carrier? This will stop the burr carrier from moving when you're unscrewing the top screw. A long allen key with an extention (small diameter pipe) should do it. That screw and washer don't look stock....
- November 7th, 2021, 11:30 pm
- Forum: Buying Advice
- Replies: 11
- Views: 911
Looking for the quietest commercial grinder
The Mythos One is pretty quiet. I haven't heard the new Malhkönig esprrsso grinders yet though