Search found 63 matches
- October 21st, 2013, 4:16 am
- Forum: Repairs, Restorations & Mods
- Replies: 13
- Views: 3110
Izzo Alex Duetto II pump noise
I've noticed very similar variations in pump noise on all machines at various times, and I concur with the other repliers that this is probably most likely due to trapped air pockets forming in the brew path and in the pump - sometimes a few shots or backflushes will solve it
- September 28th, 2013, 6:41 am
- Forum: Buy/Sell
- Replies: 0
- Views: 671
[SOLD] Quest M3 Roaster
I'm parting with a Quest M3 roaster purchased 2 years ago from The Coffee Shrub. Very well maintained. Thoroughly, meticulously cared for. Used on average, half a dozen 160g roasts per week. Works and looks as good as day 1, other than a very slight yellow tinting in the bottom of the outer shell. T...
- September 25th, 2013, 8:17 am
- Forum: Tips and Techniques
- Replies: 20
- Views: 3147
What's the purpose of preinfusion and related questions
In my experience pre-infusion makes shots more forgiving of poor barista technique, and does very little in my experience to make already good shots better. Too many variables to make a blanket statement. I've had at least a half dozen machines with pre-infusion over the years, and pulled thousands ...
- July 26th, 2013, 5:01 am
- Forum: Espresso Machines
- Replies: 8
- Views: 929
Quickmill Alexia with occasional delayed water from group
That is totally normal with all vibe-pump machines. The nature of the pump causes some cavitation as it vibrates. On my machine there is a pre-charge feature that builds water pressure prior to the valve opening which helps. Vibe pumps just by their nature produce some cavitation. Not sure if there ...
- July 17th, 2013, 7:45 pm
- Forum: Water
- Replies: 11
- Views: 12969
Ideal brand of bottled water for coffee?
Faucet mounted purifiers do little else but improve flavor via the removal of chlorine and odor-causing metals. If your water is hard and your looking for the best long term solution, you might want to look into investing in a two step carbon and cat-ion system. Chris sells a nice system on his site...
- July 4th, 2013, 7:03 am
- Forum: Grinders
- Replies: 9
- Views: 1304
Does this Mazzer Major burr look dull?
The edges look sharp. You'll definitely know a dull set when you see one. Maybe someone here could share a pic so you can see the difference. Yours look brand new so I wouldn't worry about it
- July 4th, 2013, 4:45 am
- Forum: Buying Advice
- Replies: 13
- Views: 3705
Compak K10: Pro Barista '13 vs. WBC '08 (what's changed)
There is at least one thread (probably several) discussing pros/cons on each, and the general consensus seems to favor the pb for home use. I don't have personal experience but there are a LOT of owners on here that could shed some light on this if you arent able to bring up the thread. I have a maj...
- June 24th, 2013, 12:35 am
- Forum: Espresso Machines
- Replies: 21
- Views: 19234
HX vs. double boiler temperature stability
One thing that I don't see mentioned is how the environment should be taken into factor which machine is right for you. In my experience at least, I've noticed that DB's in the E-61 class and the GS/3 tend to radiate ridiculous amounts of heat especially so if you use them in a cooler basement for i...
- June 19th, 2013, 4:24 am
- Forum: Espresso Machines
- Replies: 10
- Views: 1825
La Marzocco GS3 lock-in problem - portafilter and/or basket issue?
Completely normal and will wear in after a few months usage. Leaving it locked in all the way while its not being used will help compress it a bit faster
- June 13th, 2013, 4:03 am
- Forum: Buy/Sell
- Replies: 0
- Views: 482
[SOLD] Reg Barber Handle w/ 58mm Base
Just purchased. New condition. Tall anodized aluminum handle. Blue. Base is stainless steel 58mm American curve in perfect condition - doesnt fit my machine as tight as I would like - $50 plus shipping