Search found 85 matches

by BlrdFX
September 18th, 2012, 8:25 am
Forum: Grinders
Replies: 99
Views: 12454

Mazzer Robur E vs. Kony E

I noticed that when the LM cycles for maintaining heat (the faint little beep beep beep from the area of the PID) it lowers voltage enough to change the RPM of my Versalab slightly. I switched to Versalab to a different circuit in the kitchen and it no longer varies it's speed. If you are running of...
by BlrdFX
September 18th, 2012, 6:59 am
Forum: Grinders
Replies: 1296
Views: 166129

Owner experience with Pharos manual coffee grinder by Orphan Espresso

Good man! My wife was "Out Shopping" so could not get in on the fun The only MOD from here is to drill another set of holes so the Zero Bar can be stored on the grinder when not in use. I was thinking about using one of the OEM Pharos rubber pads on
Advertisement
by BlrdFX
September 17th, 2012, 9:27 pm
Forum: Grinders
Replies: 9
Views: 6977

Mazzer Doserless Static Problems

Excellent examples! The factory engineers knew what they were doing
by BlrdFX
September 17th, 2012, 10:10 am
Forum: Grinders
Replies: 64
Views: 19536

Ceado E37 owner experience

Whew! I was afraid that the paramedics would be needed I might eventually end up trying to buy another one(E37) in the future if I get a new flat burr grinder. By then I suppose that all the teething issues will be done. I sure like the size, weight ease of setup
by BlrdFX
September 16th, 2012, 9:26 pm
Forum: Grinders
Replies: 349
Views: 51727

Versalab M3 grinder owners

Yeah, it's not a lot. Changing the cone with the ability to be coated might do it. Keep us all Posted!
by BlrdFX
September 16th, 2012, 9:01 pm
Forum: Grinders
Replies: 349
Views: 51727

Versalab M3 grinder owners

Very nice lathe! I certainly wish I had that sitting in my shop, and a shop large enough for it!!!!!! Here is the plastic ring on the bottom of the cone that seems to collect (via static) particles. {image}
by BlrdFX
September 16th, 2012, 7:05 pm
Forum: Grinders
Replies: 349
Views: 51727

Versalab M3 grinder owners

I played around with some cocobolo for an anti-popcorn cap today. Nowhere as nice as the work that Dave S. does but it is sure better than the foam that I have been using. Next step is the aluminum model Terranova, how are you coming on the ceramic coating on the lower cone? Did
by BlrdFX
September 16th, 2012, 2:28 pm
Forum: Grinders
Replies: 1296
Views: 166129

Owner experience with Pharos manual coffee grinder by Orphan Espresso

Just finished the VooDooDaddy MOD today on #00520-V. Pretty simple to do and aligning the burrs worked out well using the Pharos YouTube #5 video AND with that philosophy in mind I did the Pharos alignment procedure. Then I aligned the lower VooDooDaddy bearing carrier bracket which got that bracket...
by BlrdFX
September 16th, 2012, 8:39 am
Forum: Grinders
Replies: 44
Views: 7877

Doserless conversion Wega rebranded Compak K10 WIP

I was considering a K10 and this certainly is a good practical Thread while considering! Thanks
by BlrdFX
September 16th, 2012, 8:21 am
Forum: Grinders
Replies: 64
Views: 19536

Ceado E37 owner experience

NO COFFEE FOR 3 DAYS Yikes, I would be looking for aspirin