Search found 34 matches
- October 7th, 2020, 4:11 pm
- Forum: Lever Espresso Machines
- Replies: 8
- Views: 1399
Londinium R24 preinfusion...
So jealous of how quiet that pump is compared to my LR
- April 15th, 2016, 12:59 pm
- Forum: Grinders
- Replies: 34
- Views: 1820
Pharos - stripped hex head...
I only have experience with the VDD modded original Pharos with the shaft collar with nylon set screws, but I set mine to be tight enough that the setting doesn't slip, but not so tight that I can't adjust the setting manually with finger pressure. I also have a roller bearing underneath the collar....
- November 4th, 2015, 4:42 pm
- Forum: Espresso Machines
- Replies: 79
- Views: 11179
EspressoForge (V1) - Review
The custom stand that you can purchase from Espresso Forge is also very sturdy. It has rubber feet so it won't slip. It's also pretty lightweight
- September 29th, 2015, 12:09 am
- Forum: Espresso Machines
- Replies: 79
- Views: 11179
EspressoForge (V1) - Review
Very comprehensive review, Sam! I've been using a V2 EspressoForge for the last 2+ weeks and have really been enjoying it. Here's my setup: {image} OE Pharos, EspressoForge V2, induction burner + Fino 1.2L kettle, Cremina (the most expensive milk steamer ) I posted in the other thread that the Fino ...
- September 16th, 2015, 3:00 pm
- Forum: Espresso Machines
- Replies: 2
- Views: 360
Rancilio Silvia boiler freeze damage - replace bolts?
I'm finally getting around to taking a look at my old Silvia which suffered some damage due to freezing temperatures a few years ago. I took the boiler off and noticed that the bolts had stripped the top ~4mm of threads from the base during the expansion. I also noticed that there seem to be plenty ...
- September 15th, 2015, 11:03 am
- Forum: Espresso Machines
- Replies: 228
- Views: 19054
EspressoForge - First Impressions
Here's a video I shot this morning where you can see the pressure gauge and the bottomless extraction. {video}
- September 12th, 2015, 10:54 pm
- Forum: Espresso Machines
- Replies: 228
- Views: 19054
EspressoForge - First Impressions
Well it is a new toy! I've only had the Forge for two days so by default Cremina has been sidelined . I really like the experience of monitoring the pull (push?) with the pressure gauge though. And I can take all my old 58mm tools back out
- September 12th, 2015, 10:34 pm
- Forum: Espresso Machines
- Replies: 228
- Views: 19054
EspressoForge - First Impressions
It seems to fit a Fino 1.2L kettle ({link}) almost perfectly -- I get some drips out the top of the kettle but I don't seem to need to hold the kettle down to see steam coming out of the top of the Forge. The other benefit is that it's very easy to fill the Forge with the gooseneck
- September 10th, 2015, 12:11 pm
- Forum: Espresso Machines
- Replies: 228
- Views: 19054
EspressoForge - First Impressions
What is the name of that steamer?
- November 7th, 2012, 5:22 pm
- Forum: Lever Espresso Machines
- Replies: 238
- Views: 43750
Londinium I - domestic lever espresso machine with commercial group
Does Londinium Espresso have a showroom? Curious since I will be in London this weekend