Search found 72 matches
- July 26th, 2015, 10:41 pm
- Forum: Repairs, Restorations & Mods
- Replies: 4
- Views: 267
Elektra Microcasa boiler leak
Thanks for the advice; I had tried raising it on blocks before but I wasn't able to confirm the leak. I will try again. I should add that the pressurestat tube is fully dry, whereas the inside of the element contact appears to be slightly damp
- July 26th, 2015, 9:50 pm
- Forum: Repairs, Restorations & Mods
- Replies: 4
- Views: 267
Elektra Microcasa boiler leak
My MCAL has a slow boiler leak. It has started to occasionally hiss, and after several days' use, a little bit of water will pool under the machine. I knew the heating element connectors were corroding; today I finally opened it and this is what I found: {image} {image} The boiler gasket is in very ...
- February 12th, 2014, 10:53 am
- Forum: Repairs, Restorations & Mods
- Replies: 35
- Views: 3416
The Caravel Replacement Portafilter from Werkstatt-Kunst?
Not quite -- the website isn't set up for int'l orders, but you can do it via email. Contact Martin (mad_machinist) and he'll tell you how
- January 8th, 2014, 9:11 am
- Forum: Grinders
- Replies: 249
- Views: 38817
Madebyknock: Knock Hausgrind
So if I understand correctly, the adjustment is the same as the Pharos when it first came out, with the addition of a dial. This would explain what you're seeing with the grinding effort getting progressively harder (and grinding finer): what's happening is that both the nut and the handle are turni...
- December 9th, 2013, 2:22 pm
- Forum: Grinders
- Replies: 36
- Views: 3189
Compak K10 Fresh - Zero grind retention so far
Can't blame them for focusing on their principal customers: coffee shops, not us
- December 9th, 2013, 1:36 pm
- Forum: Knockbox
- Replies: 50
- Views: 5928
Acaia Coffee Brewing Scale (Kickstarter)
Well, they're now just $140 shy of the goal. Looks like someone really wanted to make this happen and went in for the 5 grand VIP package
- November 27th, 2013, 11:55 am
- Forum: Grinders
- Replies: 33
- Views: 2684
Replacing Pharos 2 adjustment nuts
+1! It's extremely easy to make adjustments this way, small or big. The only problem is when I accidently break the nuts by turning the wrong one, but that has only happened when I'm not fully awake
- November 13th, 2013, 10:09 am
- Forum: Lever Espresso Machines
- Replies: 118
- Views: 7817
Elektra Microcasa a Leva, coffee + grams + tamp?
Don't blame your scale, it's probably your grinder! Assuming your Pharos is not modded, the last gram or so can sometimes take some determination to knock out. RDT can help a lot (by reducing static cling). Try this: before your first grind of the morning, see if you can knock anything out. You migh...
- November 13th, 2013, 9:47 am
- Forum: Lever Espresso Machines
- Replies: 9
- Views: 1827
Commercial levers vs. profiling pump machines - a call for a shootout
What temperature rise in a home lever? Your own MCAL temperature study shows a temperature decline: "Elektra Microcasa a Leva Explored with a Group Thermometer" I don't know enough about different machines to make generalizations, but for both the Caravel and the MCAL the following is true: when you...
- November 11th, 2013, 1:49 pm
- Forum: Coffees
- Replies: 18
- Views: 17873
What is a Geisha coffee?
Here in Canada, Social has this one at $32 for 8oz: {link} That's in the neighbourhood of $3 a cup. Not an everyday coffee, but as something special, to share with friends over the holidays? I think I might!