Search found 71 matches
- September 27th, 2022, 10:13 pm
- Forum: Coffee Roasting
- Replies: 7
- Views: 333
TC4 and 16x2 Display
It looks like I started the programming over. I found this web address and downloaded this. {link} Is there an Arduino TC4 Artisan setup webpage that's more up-to-date? On the File > Serial Monitor, I didn't see a SEND option in this version of Arduino IDE. I got to page 6 and received an error that...
- September 27th, 2022, 2:39 pm
- Forum: Coffee Roasting
- Replies: 7
- Views: 333
TC4 and 16x2 Display
I have the same Arduino and wanted to get everything into a smaller box
- September 27th, 2022, 1:42 pm
- Forum: Coffee Roasting
- Replies: 7
- Views: 333
TC4 and 16x2 Display
I downloaded the sketch in 2018. Looking at the TC4 folder, I created, the version I'm using is aArtisanQ_PID_6_7. If there's a new version, where would I download it from? Since it's been 4 years since I set all of this up, how do I load my sketch? The file saved in my folder is titled aArtisanQ_PI...
- September 25th, 2022, 6:35 pm
- Forum: Coffee Roasting
- Replies: 7
- Views: 333
TC4 and 16x2 Display
I've been running the TC4 with a 20x4 display. Since I wanted to get a smaller display, for mounting purposes, I've received a 16x2 with I2C interface. The instructions state: LCD Options The sketch supports both 16x2 and 20x4 LCDs. Disable the LCD_4x20 option if using a 16x2 display. A 20x4 LCD is ...
- August 31st, 2020, 9:04 am
- Forum: Coffee Roasting
- Replies: 5
- Views: 324
Artisan Lines
MaKoMo, Thanks for the answer. I turned the grids on. They appear on each 100 degree. Is there a way to add more lines, like on every 20 degree?
- August 30th, 2020, 10:29 am
- Forum: Coffee Roasting
- Replies: 5
- Views: 324
Artisan Lines
On an older version of Artisan there were horizontal and vertical lines. How can I add these lines back in on the new version of artisan (2.4.0), so I can see the temperature, ex. 300, 400 degrees all the way across the screen while roasting?
- July 9th, 2019, 5:41 pm
- Forum: Coffee Roasting
- Replies: 2
- Views: 214
Artisan and Windows?
After researching, I found you can take a Windows S mode computer out of S mode. This would then be in Windows 10 Home. {link}
- July 9th, 2019, 10:51 am
- Forum: Coffee Roasting
- Replies: 2
- Views: 214
Artisan and Windows?
I'm using Artisan on Windows 10. Does anyone use Artisan on Windows 10 S ?
- May 11th, 2019, 2:22 pm
- Forum: Coffee Roasting
- Replies: 5
- Views: 538
Quest M3s minimum grams
EddyQ, Thank you
- May 11th, 2019, 1:25 pm
- Forum: Coffee Roasting
- Replies: 5
- Views: 538
Quest M3s minimum grams
Tom, Thanks. Here's a pic of where I have the probes. There's no probe next to the bottom window. Would 50 grams work, or should i just stay with the 100g? {image}