Silicone tubing
-
- Posts: 25
- Joined: 7 years ago
I have the diagram for my ECM Classika PID and know the dimensions for the tubing inside.
Would it be ok to pick up the tubing from a large hose company in my home town, or does ECM and other manufacturers use a specific of different tubing?
I'm under the impression that it should be a fairly standard part.
Thank you
Would it be ok to pick up the tubing from a large hose company in my home town, or does ECM and other manufacturers use a specific of different tubing?
I'm under the impression that it should be a fairly standard part.
Thank you
- Teflon1064
- Posts: 83
- Joined: 11 years ago
Call ahead, I was after the same thing but had to hunt around quite a bit and ended up ordering from italy
-
- Posts: 499
- Joined: 19 years ago
Normally sold by the foot at most on line espresso equipment sales places, in the states Chris Coffee Service , Stefano espresso care, 1st line equipment carry it.
-
- Posts: 25
- Joined: 7 years ago
I'll check with Clive Coffee, who sold me the machine and has been excellent with questions.
I'm a ways away from needing hose since the machine is new, but tend to be OCD on having extra repair parts on hand.
Thanks
I'm a ways away from needing hose since the machine is new, but tend to be OCD on having extra repair parts on hand.
Thanks
-
- Posts: 42
- Joined: 8 years ago
as long as the dimensions and thermal resistance properties are similar i would buy it locally. hoses and hardware are all much more expensive from the manufacturer