Conti Princess restoration
-
- Posts: 5
- Joined: 7 years ago
Process of trying to restore my Conti princess. I have a cooked on gasket that I believe is on the underside of the group head does anybody know how to get that off without damaging the metal
-
- Supporter ♡
- Posts: 852
- Joined: 7 years ago
You can remove an old, hardened group head gasket with a tool like this:
https://home.lamarzoccousa.com/product/gasket-pick/
If the gasket comes apart in pieces, you can then carefully clean the groove with something a bit more blunt to avoid scratching the metal.
Rocky
https://home.lamarzoccousa.com/product/gasket-pick/
If the gasket comes apart in pieces, you can then carefully clean the groove with something a bit more blunt to avoid scratching the metal.
Rocky
- cannonfodder
- Team HB
- Posts: 10507
- Joined: 19 years ago
Run a small wood screw into it (but not into the group) grab it with pliers and pull. That will yank it loose or put out a chunk. After that a dental pick or paint can opener to pry it out the rest of the way and scrub the raceway to clean it out.
Dave Stephens
-
- Posts: 5
- Joined: 7 years ago
UPDATE:
I am looking to restore my Conti princess machine and I am looking for a schematic and a place(website) in which I can find replacement parts, or parts from other machines that may work on my machine
I am looking to restore my Conti princess machine and I am looking for a schematic and a place(website) in which I can find replacement parts, or parts from other machines that may work on my machine