Faemina driptray and grill

A haven dedicated to manual espresso machine aficionados.
User avatar
grog
Posts: 1807
Joined: 12 years ago

#1: Post by grog »

I know, I know...this is a long shot. But if you have one of these from a parts machine that you are willing to part with, let me know. Alternatively, if someone has 3D printed this, and could email the file to me, that would be much appreciated too.
LMWDP #514

User avatar
grog (original poster)
Posts: 1807
Joined: 12 years ago

#2: Post by grog (original poster) »

Several folks pointed me towards the drip tray (minus the grill) that was on eBay.it . I've reached an agreement with that seller and the tray is on its' way to me. Now I need the grill. If anyone is up for scanning the grill into a file we can use to 3D print, that would be most appreciated.
LMWDP #514

User avatar
yakster
Supporter ♡
Posts: 7319
Joined: 15 years ago

#3: Post by yakster »

Here's a scan of my grill, it's stamped so that the top of the tray is a bit below the edge and the edge is about 5 mm high. It fits over the driptray like a loose lid.

Top of tray:


Bottom of tray:
-Chris

LMWDP # 272