Read about current and future offerings from the site sponsors.
cannonfodder (original poster)
Team HB
Posts: 10507 Joined: 19 years ago
#951 :
Post
by cannonfodder (original poster) » October 13th, 2016, 10:14 pm
Wish I had enough of this curly black walnut for a set of machine controls.
Dave Stephens
MarkDD
Posts: 2 Joined: 8 years ago
#952 :
Post
by MarkDD » October 13th, 2016, 10:55 pm
Gorgeous wood Dave & as always beautiful workmanship.
Mark
Sponsored by Roastmasters - everything for the home coffee roaster
cannonfodder (original poster)
Team HB
Posts: 10507 Joined: 19 years ago
#953 :
Post
by cannonfodder (original poster) » October 16th, 2016, 5:47 pm
Been out of town for a couple weeks then personal work has put me behind a bit. I did manage to finally finish this cocobolo set for an Anita.
Dave Stephens
cannonfodder (original poster)
Team HB
Posts: 10507 Joined: 19 years ago
#954 :
Post
by cannonfodder (original poster) » October 25th, 2016, 8:47 pm
Lot of parts in the works but I managed to put my big knife together. 15 inches of steel buffed to mirror shine, curly walnut scales and silver nickel pins.
Dave Stephens
Compass Coffee
Posts: 2844 Joined: 19 years ago
#955 :
Post
by Compass Coffee » October 25th, 2016, 9:17 pm
cannonfodder wrote: Lot of parts in the works but I managed to put my big knife together. 15 inches of steel buffed to mirror shine, curly walnut scales and silver nickel pins.
<image>
Bit of over kill for cutting open coffee bags don't ya think!
Mike McGinness
cannonfodder (original poster)
Team HB
Posts: 10507 Joined: 19 years ago
#956 :
Post
by cannonfodder (original poster) » October 26th, 2016, 10:14 pm
Burlap is tough stuff. Have to protect myself from those zombie beans
Dave Stephens
cannonfodder (original poster)
Team HB
Posts: 10507 Joined: 19 years ago
#957 :
Post
by cannonfodder (original poster) » November 1st, 2016, 11:04 pm
Bacote for some Vesuvius espresso machines
Dave Stephens
cannonfodder (original poster)
Team HB
Posts: 10507 Joined: 19 years ago
#958 :
Post
by cannonfodder (original poster) » November 1st, 2016, 11:05 pm
Black walnut portafilter handle for a fellow wood worker.
Dave Stephens
cannonfodder (original poster)
Team HB
Posts: 10507 Joined: 19 years ago
#959 :
Post
by cannonfodder (original poster) » November 1st, 2016, 11:06 pm
Black and white ebony and ivory shaving brush with a 26mm high mountain white badger brush.
Dave Stephens
cannonfodder (original poster)
Team HB
Posts: 10507 Joined: 19 years ago
#960 :
Post
by cannonfodder (original poster) » November 7th, 2016, 9:15 am
Dave Stephens