Rancilio Silvia - Loose pump
-
- Posts: 22
- Joined: 12 years ago
Hi guys,
The pump on my Silvia is loose, and is making excessive vibrating noises when used. I am going to check to see if the bolts holding it on are loose, or if the pump has broken the mounts.
I don't want to start undoing everything to get a look at it, and am wondering if anyone knows what part of the machine exterior to take off to check it out?
Thanks Danny
The pump on my Silvia is loose, and is making excessive vibrating noises when used. I am going to check to see if the bolts holding it on are loose, or if the pump has broken the mounts.
I don't want to start undoing everything to get a look at it, and am wondering if anyone knows what part of the machine exterior to take off to check it out?
Thanks Danny
- stefano65
- Sponsor
- Posts: 1405
- Joined: 17 years ago
remove top tray (4 screws)
loosen ( not need to remove) 2 top screws
loosen as well the lower back screw (you might need a Phillips longer then usual)
then tilt bottom back out to disengage the bottom them pull out casing
after that remove divider with 2 screws and you have full view of the pump
loosen ( not need to remove) 2 top screws
loosen as well the lower back screw (you might need a Phillips longer then usual)
then tilt bottom back out to disengage the bottom them pull out casing
after that remove divider with 2 screws and you have full view of the pump
Stefano Cremonesi
Stefano's Espresso Care
Repairs & sales from Oregon.
Stefano's Espresso Care
Repairs & sales from Oregon.
-
- Posts: 22
- Joined: 12 years ago
Thanks heaps - I'll give that a go tonight