Getting to know the Izzo Alex - Page 5

[jmatt]

Thanks to DaveC, I had my Expobar single-hole steam tip waiting for me when I got home.

Really works great for my smaller pitcher. Quick and much easier than the 2-holer was.

thanks for the tip, Dave!

Where did you source the Expobar single-hole steam tip? I need one.

[lparsons21]

I got it at wholelattelove.com

Works great too!

[bluesman13]

last post on this thread dec 2006.

How is everyones Alex holding up? Did all your problems get worked out? How are your pulls? Anything you'd like to share with a prospective buyer?

[BowedToothDoc]

last post on this thread dec 2006.

How is everyones Alex holding up? Did all your problems get worked out? How are your pulls? Anything you'd like to share with a prospective buyer?

Yeah,
I am interested as well since I just ordered an Alex and Macap grinder from Chris. Should be arriving shortly after the holiday weekend.

[kinkbmxco]

Ive owned my Alex MK1 for some time ... I believe 6 months is creeping up right about now...
Nothing bad to report. Only very small annoyances and some of them were remedied in the newer model, the mK2. By this I am referring to primarily my dislike of the small steam knobs. I must reiterate how insignificant this really is, but I stare with jealous eyes to those big Vetrano steam and hot water knobs. I just find the Alex knobs to be small and unsubstantial in my hand, and from an aesthetic standpoint, I also like larger knobs too.
Multi Directional wands is another gripe I have with MY Mk1, but the MK2 does come equip with these, as well as a brew pressure and boiler pressure gauge.
I love my machine and have never really encountered any technical issues with it.
I back flushed with detergent once and for a short period of time after, it was making a chirping noise which eventually went away. Thats the extent of my issues.
If I could go back in time...
I still probably would have got an Alex.
It was either the Alex or Vetrano. But with Alex's extra capability to use as a plumb in (Current set up) or a pour over, was important to me so that gave me the extra push.

Occasionally there is some rattle from the cup warmer tray, this could be easily fixed but I have been too absent minded to fix it as of late.
hope this helps..

[lparsons21]

last post on this thread dec 2006.

How is everyones Alex holding up? Did all your problems get worked out? How are your pulls? Anything you'd like to share with a prospective buyer?

I've had my Alex Mk2 since Dec 2006. It has worked flawlessly and today's cup was just as good as the last, which was as good as the last....

No problems after some initial tweaks.

I do a shot in the AM to wake me up, an Americano to drink with the news and generally either a Cafe Crema or Americano later in the day and sometimes in the night. Never a burp in operation.

[BowedToothDoc]

I've had my Alex Mk2 since Dec 2006. It has worked flawlessly and today's cup was just as good as the last, which was as good as the last....

No problems after some initial tweaks.

I do a shot in the AM to wake me up, an Americano to drink with the news and generally either a Cafe Crema or Americano later in the day and sometimes in the night. Never a burp in operation.

Good to hear Guy's! I can't wait to get it set up and start pulling some nice shots.
I have some Black Cat waiting and some Redline on the way
Hopefully dialing in the M4 won't be too difficult.

[bluesman13]

BTD (!),

I'm considering the exact setup as you - macap and alex. I'm very nervous about pulling the trigger. Kind of like having a Ferrari in your garage and afraid to drive it.

[BowedToothDoc]

BTD (!),

I'm considering the exact setup as you - macap and alex. I'm very nervous about pulling the trigger. Kind of like having a Ferrari in your garage and afraid to drive it.

Actually, More like a M1 Abrams
72 lbs!

[BowedToothDoc]

Patiently waiting for Brown to deliver the new 72lb baby!
Hopefully no shipping damage, should be able to start pulling some shots this afternoon if all goes well.

[BowedToothDoc]

Just wanted to report that my machine arrived safely and everything is getting dialed in. The machine is producing some excellent shots already and I am really happy with the Macap m4 grinder. It does use up some serious water with the flushing and all so I am hoping to plumb it in in the near future. Will post some pics when I have time.