PID Problem Rancilio Silvia
-
- Posts: 13
- Joined: 9 years ago
I have a PID that is malfunctioning. Auber SYL-1512A2 PID connected to a Rancilio Silvia.
At present, the set up value for the CorF (celsius or Fahrenheit) is reading -095 (with all digits FLASHING). All attempts to set the value to 1 (for F) or 0 (for C) have failed.
Looking to see what next steps to take....
At present, the set up value for the CorF (celsius or Fahrenheit) is reading -095 (with all digits FLASHING). All attempts to set the value to 1 (for F) or 0 (for C) have failed.
Looking to see what next steps to take....
- chuckcoffee
- Posts: 297
- Joined: 10 years ago
Pants
If you have not yet contact Auber. That may be your fastest route.
sales@auberins.com or info@auberins.com(use both)
Suyi Liu helped me out on my install several years ago. He was responding on the weekend after hours. Good customer service.
Good Luck
If you have not yet contact Auber. That may be your fastest route.
sales@auberins.com or info@auberins.com(use both)
Suyi Liu helped me out on my install several years ago. He was responding on the weekend after hours. Good customer service.
Good Luck
-
- Posts: 13
- Joined: 9 years ago
Emails sent to Auber....thanks....more news to follow...
-
- Posts: 13
- Joined: 9 years ago
Current response from Auber
"I an not sure how this could happen, The Corf can only be set to 0 or 1."
So there....
"I an not sure how this could happen, The Corf can only be set to 0 or 1."
So there....
-
- Posts: 13
- Joined: 9 years ago
Auber repaired my PID for $20 USD. The chip malfunctioned.......installed the repaired item and machine is back to normal