Below is a collection of this forum's most popular topics. To nominate a thread for inclusion in this list, please post a reply to this message. Remember to check the Resources page for other references.
So the GCP has a single hole on the left side for water output that's connected to the boiler behind the dispersion block, and even though the dispersion block is supposed to disperse the water evenly, I am consistently noticing a pattern where the left side of the puck (where...
As most of you know, La Marzocco graciously sent a small army of Micras out to Team HB to facilitate our La Marzocco Linea Micra Espresso Machine Review .
Go check it out - it answers most of the questions folks have about the machine.
I have noticed, for a while now, that the number of Marzocco queries is rather high. I have a Spaziale Vivaldi and so far the only consumable I have replaced in the over 10 years that I've owned it - over six shots daily - has been the group gasket.
Interesting head-to-head from Sprometheus comparing the GS3 to the DE1. I thought it was a good comparison between the two machines, and liked how he did a blind taste test between the two.
I have my LMLM plumbed in. I don't have a pressure regulator in place and am wondering if a) I need one, and b) if there are any recommendations on one.
Side note, it was a slight PITA getting the hose into the machine, it kept rubbing against the steam boiler insulation, and to add on to that they don't tell you that the two ends of the...
I purchased a Linea Mini that is plumbed in. I want to convert it back to the reservoir and I can't find any info online on how to do that. If anyone can point me to a reference or share their adventure with this I would be extremely grateful. Thank you in advance!
My ECM Syn steam wand has an adapter and I do not like the stock 2 hole 1.2mm steam nozzle
1 : would the ECM 4 hole 1.2mm nozzle make the steam boiler loose too much pressure at once ?
I hv the technique just that the 1400w heater might not be powerful...
I have purchased Profitec Pro 600 (as a former Breville Barista Express owner). however, I have seen that there are so many scratches on both portafilters. (there are some tiny scratches on the tray as well)
I unscrewed the steam wand and there was some water...